AT90CAN32 Automotive Atmel Corporation, AT90CAN32 Automotive Datasheet - Page 32

• Manufacturer Part Number: AT90CAN32 Automotive
• Manufacturer: Atmel Corporation

Specifications of AT90CAN32 Automotive

• Flash (kbytes): 32 Kbytes
• Pin Count: 64
• Max. Operating Frequency: 16 MHz
• Cpu: 8-bit AVR
• # Of Touch Channels: 16
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 53
• Ext Interrupts: 8
• Usb Speed: No
• Usb Interface: No
• Spi: 1
• Twi (i2c): 1
• Uart: 2
• Can: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 15
• Analog Comparators: 1
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 2
• Eeprom (bytes): 1024
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 125
• I/o Supply Class: 2.7 to 5.5
• Operating Voltage (vcc): 2.7 to 5.5
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 4
• Output Compare Channels: 8
• Input Capture Channels: 2
• Pwm Channels: 7
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

4.5.6
32
AT90CAN32/64/128
External Memory Control Register A – XMCRA
• Bit 7 – SRE: External SRAM/XMEM Enable
Writing SRE to one enables the External Memory Interface.The pin functions AD7:0, A15:8,
ALE, WR, and RD are activated as the alternate pin functions. The SRE bit overrides any pin
direction settings in the respective data direction registers. Writing SRE to zero, disables the
External Memory Interface and the normal pin and data direction settings are used. Note that
when the XMEM interface is disabled, the address space above the internal SRAM boundary is
not mapped into the internal SRAM.
• Bit 6..4 – SRL2, SRL1, SRL0: Wait-state Sector Limit
It is possible to configure different wait-states for different External Memory addresses. The
external memory address space can be divided in two sectors that have separate wait-state bits.
The SRL2, SRL1, and SRL0 bits select the split of the sectors, see
default, the SRL2, SRL1, and SRL0 bits are set to zero and the entire external memory address
space is treated as one sector. When the entire SRAM address space is configured as one sec-
tor, the wait-states are configured by the SRW11 and SRW10 bits.
Table 4-3.
Note:
Bit
Read/Write
Initial Value
SRL2
0
0
0
0
1
1
1
1
1. See
Sector limits with different settings of SRL2..0
SRE
R/W
Table 4-1 on page 18
7
0
SRL1
0
0
1
1
0
0
1
1
SRL2
R/W
6
0
SRL0
SRL1
R/W
5
0
0
1
0
1
0
1
0
1
for “XMem start” setting.
SRL0
R/W
4
0
Lower sector
Upper sector
Lower sector
Upper sector
Lower sector
Upper sector
Lower sector
Upper sector
Lower sector
Upper sector
Lower sector
Upper sector
Lower sector
Upper sector
Lower sector
Upper sector
SRW11
R/W
Sector
3
0
SRW10
R/W
2
0
SRW01
R/W
1
0
Table 4-3
“XMem start”
“XMem start”
“XMem start”
“XMem start”
“XMem start”
“XMem start”
“XMem start”
“XMem start”
SRW00
R/W
0
0
Addressing
0xC000 - 0xFFFF
0xA000 - 0xFFFF
0xE000 - 0xFFFF
0x2000 - 0xFFFF
0x4000 - 0xFFFF
0x6000 - 0xFFFF
0x8000 - 0xFFFF
and
N/A
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
XMCRA
7682C–AUTO–04/08
Figure
- 0xDFFF
- 0xBFFF
- 0xFFFF
- 0x1FFF
- 0x3FFF
- 0x5FFF
- 0x7FFF
- 0x9FFF
4-4. By