AT90CAN32 Automotive Atmel Corporation, AT90CAN32 Automotive Datasheet - Page 86

• Manufacturer Part Number: AT90CAN32 Automotive
• Manufacturer: Atmel Corporation

Specifications of AT90CAN32 Automotive

• Flash (kbytes): 32 Kbytes
• Pin Count: 64
• Max. Operating Frequency: 16 MHz
• Cpu: 8-bit AVR
• # Of Touch Channels: 16
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 53
• Ext Interrupts: 8
• Usb Speed: No
• Usb Interface: No
• Spi: 1
• Twi (i2c): 1
• Uart: 2
• Can: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 15
• Analog Comparators: 1
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 2
• Eeprom (bytes): 1024
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 125
• I/o Supply Class: 2.7 to 5.5
• Operating Voltage (vcc): 2.7 to 5.5
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 4
• Output Compare Channels: 8
• Input Capture Channels: 2
• Pwm Channels: 7
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

86
AT90CAN32/64/128
TDI, JTAG Test Data In. Serial input data to be shifted in to the Instruction Register or Data Reg-
ister (scan chains). When the JTAG interface is enabled, this pin can not be used as an I/O pin.
• TCK, ADC6 – Port F, Bit 6
ADC6, Analog to Digital Converter, input channel 6
TDO, JTAG Test Data Out. Serial output data from Instruction Register or Data Register. When
the JTAG interface is enabled, this pin can not be used as an I/O pin.
• TMS, ADC5 – Port F, Bit 5
ADC5, Analog to Digital Converter, input channel 5
TMS, JTAG Test mode Select. This pin is used for navigating through the TAP-controller state
machine. When the JTAG interface is enabled, this pin can not be used as an I/O pin.
• TDO, ADC4 – Port F, Bit 4
ADC4, Analog to Digital Converter, input channel 4
TCK, JTAG Test Clock. JTAG operation is synchronous to TCK. When the JTAG interface is
enabled, this pin can not be used as an I/O pin.
• ADC3 – Port F, Bit 3
ADC3, Analog to Digital Converter, input channel 3.
• ADC2 – Port F, Bit 2
ADC2, Analog to Digital Converter, input channel 2.
• ADC1 – Port F, Bit 1
ADC1, Analog to Digital Converter, input channel 1.
• ADC0 – Port F, Bit 0
ADC0, Analog to Digital Converter, input channel 0.
.
.
.
7682C–AUTO–04/08