AT90CAN32 Automotive Atmel Corporation, AT90CAN32 Automotive Datasheet - Page 83

• Manufacturer Part Number: AT90CAN32 Automotive
• Manufacturer: Atmel Corporation

Specifications of AT90CAN32 Automotive

• Flash (kbytes): 32 Kbytes
• Pin Count: 64
• Max. Operating Frequency: 16 MHz
• Cpu: 8-bit AVR
• # Of Touch Channels: 16
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 53
• Ext Interrupts: 8
• Usb Speed: No
• Usb Interface: No
• Spi: 1
• Twi (i2c): 1
• Uart: 2
• Can: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 15
• Analog Comparators: 1
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 2
• Eeprom (bytes): 1024
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 125
• I/o Supply Class: 2.7 to 5.5
• Operating Voltage (vcc): 2.7 to 5.5
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 4
• Output Compare Channels: 8
• Input Capture Channels: 2
• Pwm Channels: 7
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

9.3.6
7682C–AUTO–04/08
Alternate Functions of Port E
The Port E pins with alternate functions are shown in
Table 9-15.
The alternate pin configuration is as follows:
• PCINT7/ICP3 – Port E, Bit 7
INT7, External Interrupt source 7. The PE7 pin can serve as an external interrupt source.
ICP3, Input Capture Pin3: The PE7 pin can act as an input capture pin for Timer/Counter3.
• INT6/T3 – Port E, Bit 6
INT6, External Interrupt source 6. The PE6 pin can serve as an external interrupt source.
T3, Timer/Counter3 counter source.
• INT5/OC3C – Port E, Bit 5
INT5, External Interrupt source 5. The PE5 pin can serve as an External Interrupt source.
OC3C, Output Compare Match C output. The PE5 pin can serve as an External output for the
Timer/Counter3 Output Compare C. The pin has to be configured as an output (DDE5 set “one”)
to serve this function. The OC3C pin is also the output pin for the PWM mode timer function.
• INT4/OC3B – Port E, Bit 4
INT4, External Interrupt source 4. The PE4 pin can serve as an External Interrupt source.
OC3B, Output Compare Match B output. The PE4 pin can serve as an External output for the
Timer/Counter3 Output Compare B. The pin has to be configured as an output (DDE4 set (one))
to serve this function. The OC3B pin is also the output pin for the PWM mode timer function.
• AIN1/OC3A – Port E, Bit 3
AIN1 – Analog Comparator Negative input. This pin is directly connected to the negative input of
the Analog Comparator.
OC3A, Output Compare Match A output. The PE3 pin can serve as an External output for the
Timer/Counter3 Output Compare A. The pin has to be configured as an output (DDE3 set “one”)
to serve this function. The OC3A pin is also the output pin for the PWM mode timer function.
Port Pin
PE7
PE6
PE5
PE4
PE3
PE2
PE1
PE0
Alternate Function
INT7/ICP3 (External Interrupt 7 Input or Timer/Counter3 Input Capture Trigger)
INT6/ T3 (External Interrupt 6 Input or Timer/Counter3 Clock Input)
INT5/OC3C (External Interrupt 5 Input or Output Compare and PWM Output C for
Timer/Counter3)
INT4/OC3B (External Interrupt4 Input or Output Compare and PWM Output B for
Timer/Counter3)
AIN1/OC3A (Analog Comparator Negative Input or Output Compare and PWM Output A
for Timer/Counter3)
AIN0/XCK0 (Analog Comparator Positive Input or USART0 external clock input/output)
PDO/TXD0 (Programming Data Output or UART0 Transmit Pin)
PDI/RXD0 (Programming Data Input or UART0 Receive Pin)
Port E Pins Alternate Functions
Table
AT90CAN32/64/128
9-15.
83