cx28394 Conexant Systems, Inc., cx28394 Datasheet - Page 229

• Manufacturer Part Number: cx28394
• Description: Quad/x16/octal-t1/e1/j1 Framers
• Manufacturer: Conexant Systems, Inc.

CX28394/28395/28398
Quad/x16/Octal—T1/E1/J1 Framers
STACK contains new signaling information from those channels with SIG_STK [addr 180–19F] enabled.
STACK allows the processor to conveniently monitor only changed ABCD signaling values from the selected
channels. RSIG interrupt [addr 008] is triggered at the end of any multiframe where one or more ABCD
signaling values have changed. The processor reads the STACK address twice to retrieve the channel number
(WORD = 0) and to retrieve the new ABCD value (WORD = 1). The processor continues to read from STACK
until the last new value is retrieved (MORE = 0).
each channel in which the stack is enabled [SIG_STK; addr 180–19F]. STACK contents are updated with new
output signaling if the buffered RSIGn input and output ABCD signaling values differ. STACK is evaluated on a
channel-by-channel basis after the D-bit is updated. The processor must poll the RSIG interrupt to determine
when STACK has new information.
WORD
MORE
CH[4:0]
WORD
MORE
SIG_BITA–D
100054E
Word 0: Channel Number (first read)
Word 1: New Signaling Value (second read)
0DA—Receive Signaling Stack (STACK)
Internal STACK read/write pointers are initialized by RESET [addr 001]. STACK contents are updated for
WORD
WORD
7
7
Stack Word ID (always 0 in Word 0)
More Stack Contents (always 1 in Word 0)
Channel Number (E1 range 0–31; T1 range 1–24)
Stack Word ID (always 1 in Word 1)
More Stack Contents equal 1 if more available.
Signaling Bit A–D–Processor reads the new ABCD signaling value from this location. The
ABCD value is also preset in RSIGn (addr 1A0–1BF) output signaling buffer, so the processor
does not need to store a local copy of each channel’s signaling status.
MORE
MORE
6
6
WORD
0
0
1
1
—
—
5
5
MORE
0
1
0
1
CH[4]
—
4
4
Conexant
First word, get channel
Never used
No change or last change, stop
New signaling, keep reading
SIG_BITA
CH[3]
3
3
MPU Response
SIG_BITB
CH[2]
2
2
SIG_BITC
3.16 System Bus Registers
CH[1]
1
1
3.0 Registers
SIG_BITD
CH[0]
0
0
3-107