MCF5407CAI220 Freescale Semiconductor, MCF5407CAI220 Datasheet - Page 70

• Manufacturer Part Number: MCF5407CAI220
• Description: IC MPU 32B 220MHZ COLDF 208-FQFP
• Manufacturer: Freescale Semiconductor
• Series: MCF540xr

Specifications of MCF5407CAI220

• Core Processor: Coldfire V4
• Core Size: 32-Bit
• Speed: 220MHz
• Connectivity: EBI/EMI, I²C, UART/USART
• Peripherals: DMA, WDT
• Number Of I /o: 16
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-FQFP
• Processor Series: MCF540x
• Core: ColdFire V4
• Data Bus Width: 32 bit
• Program Memory Size: 8 KB
• Data Ram Size: 4 KB
• Maximum Clock Frequency: 162 MHz
• Number Of Programmable I/os: 16
• Operating Supply Voltage: 1.8 V to 3.3 V
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JLINK-CF-BDM26, EWCF
• Cpu Speed: 220MHz
• Embedded Interface Type: I2C, UART
• Digital Ic Case Style: FQFP
• No. Of Pins: 208
• Supply Voltage Range: 3.3V
• Rohs Compliant: Yes
• For Use With: M5407C3 - KIT EVAL FOR MCF5407 W/ETHERNET
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Features and Enhancements
2.1.2.1 Instruction Fetch Pipeline (IFP)
Because the fetch and execution pipelines are decoupled by a ten-instruction FIFO buffer,
the IFP can prefetch instructions before the OEP needs them, minimizing stalls.
2.1.2.1.1 Branch Acceleration
To maximize the performance of conditional branch instructions, the IFP implements a
sophisticated two-level acceleration mechanism. The first level is an 8-entry, direct-mapped
branch cache with 2 bits for indicating four prediction states (strongly/weakly
taken/not-taken) for each entry. The branch cache also provides the association between
instruction addresses and the corresponding target address. In the event of a branch cache
hit, if the branch is predicted as taken, the branch cache sources the target address from the
IC1 stage back into the IAG to redirect the prefetch stream to the new location.
The branch cache implements instruction folding, so conditional branch instructions
correctly predicted as taken can execute in zero cycles. For conditional branches with no
information in the branch cache, a second-level, direct-mapped prediction table is accessed.
Each of its 128 entries uses the same 2-bit prediction mechanism as the branch cache.
If a branch is predicted as taken, branch acceleration logic in the IED stage generates the
target address. Other change-of-flow instructions, including unconditional branches,
jumps, and subroutine calls, use a similar mechanism where the IFP calculates the target
address. The performance of subroutine return instruction (RTS) is improved through the
use of a four-entry, LIFO hardware return stack. In all cases, these mechanisms allow the
IFP to redirect the fetch stream down the predicted path well ahead of instruction execution.
2.1.2.2 Operand Execution Pipeline (OEP)
The two instruction registers in the decode stage (DS) of the OEP are loaded from the FIFO
instruction buffer or are bypassed directly from the instruction early decode (IED). The
OEP consists of two, traditional two-stage RISC compute engines with a dual-ported
register file access feeding an arithmetic logic unit (ALU).
The compute engine at the top of the OEP (the address ALU) is used typically for operand
address calculations; the execution ALU at the bottom is used for instruction execution. The
resulting structure provides 4 Gbytes/S operand bandwidth (at 162 MHz) to the two
compute engines and supports single-cycle execution speeds for most instructions,
including all load and store operations and most embedded-load operations. The V4 OEP
supports the ColdFire Revision B instruction set, which adds a few new instructions to
improve performance and code density.
The OEP also implements the following advanced performance features:
2-4
• Stalls are minimized by dynamically basing the choice between the address ALU or
• The address ALU and register renaming resources together can execute heavily used
execution ALU for instruction execution on the pipeline state.
opcodes and forward results to subsequent instructions with no pipeline stalls.
MCF5407 User’s Manual