DF2506BR26DV Renesas Electronics America, DF2506BR26DV Datasheet - Page 791

• Manufacturer Part Number: DF2506BR26DV
• Description: IC H8S/2506 MCU FLASH 176-LFBGA
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2500r

Specifications of DF2506BR26DV

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 26MHz
• Connectivity: I²C, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 104
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 176-LFBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

(3)
After adjustment of the bit rate, the protocol for communications between the host and the boot
program is as shown below.
1. One-byte commands and one-byte responses
2. n-byte commands or n-byte responses
3. Error response
4. Programming of 128 bytes
5. Memory read response
These commands and responses are comprised of a single byte. These are consists of the
inquiries and the ACK for successful completion.
These commands and responses are comprised of n bytes of data. These are selections and
responses to inquiries.
The amount of programming data is not included under this heading because it is determined
in another command.
The error response is a response to inquiries that consists of an error response and an error
code. The response comes in two bytes.
The size is not specified in commands. The size of n is indicated in response to the
programming unit inquiry.
This response consists of four bytes of data.
Communications Protocol
Host
Figure 20.24 Bit-Rate-Adjustment Sequence
H'00 (Completion of adjustment)
H'E6 (Boot response)
H'00 (30 times maximum)
H'FF (error)
H'55
Rev. 6.00 Sep. 24, 2009 Page 743 of 928
Boot Program
Measuring the
1-bit length
Section 20 Flash Memory
REJ09B0099-0600