HD64F3644H Renesas Electronics America, HD64F3644H Datasheet - Page 319

• Manufacturer Part Number: HD64F3644H
• Description: IC H8 MCU FLASH 32K 64-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Lr

Specifications of HD64F3644H

• Core Processor: H8/300L
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI
• Peripherals: PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 64-QFP
• Package: 64PQFP
• Family Name: H8
• Maximum Speed: 8 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 45
• Interface Type: SCI
• On-chip Adc: 8-chx8-bit
• Number Of Timers: 4
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Serial Control Register 3 (SCR3)
SCR3 is an 8-bit register for selecting transmit or receive operation, the asynchronous mode clock
output, interrupt request enabling or disabling, and the transmit/receive clock source.
SCR3 can be read or written by the CPU at any time.
SCR3 is initialized to H'00 upon reset, and in standby, watch, subactive, or subsleep mode.
Bit 7 Transmit interrupt Enable (TIE): Bit 7 selects enabling or disabling of the transmit data
empty interrupt request (TXI) when transmit data is transferred from the transmit data register
(TDR) to the transmit shift register (TSR), and bit TDRE in the serial status register (SSR) is set to
1.
TXI can be released by clearing bit TDRE or bit TIE to 0.
Bit 7: TIE
0
1
Bit 6 Receive Interrupt Enable (RIE): Bit 6 selects enabling or disabling of the receive data
full interrupt request (RXI) and the receive error interrupt request (ERI) when receive data is
transferred from the receive shift register (RSR) to the receive data register (RDR), and bit RDRF
in the serial status register (SSR) is set to 1. There are three kinds of receive error: overrun,
framing, and parity.
RXI and ERI can be released by clearing bit RDRF or the FER, PER, or OER error flag to 0, or by
clearing bit RIE to 0.
Bit 6: RIE
0
1
Bit
Initial value
Read/Write
R/W
Transmit data empty interrupt request (TXI) disabled
Transmit data empty interrupt request (TXI) enabled
Receive data full interrupt request (RXI) and receive error interrupt request
(ERI) disabled
Receive data full interrupt request (RXI) and receive error interrupt request
(ERI) enabled
Description
Description
TIE
7
0
R/W
RIE
0
6
R/W
TE
0
5
R/W
RE
4
0
Section 10 Serial Communication Interface
Rev. 6.00 Sep 12, 2006 page 297 of 526
MPIE
R/W
3
0
TEIE
R/W
2
0
REJ09B0326-0600
CKE1
R/W
1
0
(initial value)
(initial value)
CKE0
R/W
0
0