HD64F3644H Renesas Electronics America, HD64F3644H Datasheet - Page 45

• Manufacturer Part Number: HD64F3644H
• Description: IC H8 MCU FLASH 32K 64-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Lr

Specifications of HD64F3644H

• Core Processor: H8/300L
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI
• Peripherals: PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 64-QFP
• Package: 64PQFP
• Family Name: H8
• Maximum Speed: 8 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 45
• Interface Type: SCI
• On-chip Adc: 8-chx8-bit
• Number Of Timers: 4
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

2.4
2.4.1
The H8/300L CPU supports the eight addressing modes listed in table 2.1. Each instruction uses a
subset of these addressing modes.
Table 2.1
No.
1
2
3
4
5
6
7
8
1. Register Direct Rn: The register field of the instruction specifies an 8- or 16-bit general
2. Register Indirect @Rn: The register field of the instruction specifies a 16-bit general
3. Register Indirect with Displacement @(d:16, Rn): The instruction has a second word
4. Register Indirect with Post-Increment or Pre-Decrement @Rn+ or @–Rn:
register containing the operand.
Only the MOV.W, ADD.W, SUB.W, CMP.W, ADDS, SUBS, MULXU (8 bits 8 bits), and
DIVXU (16 bits ÷ 8 bits) instructions have 16-bit operands.
register containing the address of the operand in memory.
(bytes 3 and 4) containing a displacement which is added to the contents of the specified
general register to obtain the operand address in memory.
This mode is used only in MOV instructions. For the MOV.W instruction, the resulting
address must be even.
Register indirect with post-increment @Rn+
The @Rn+ mode is used with MOV instructions that load registers from memory.
The register field of the instruction specifies a 16-bit general register containing the address
of the operand. After the operand is accessed, the register is incremented by 1 for MOV.B
or 2 for MOV.W, and the result of the addition is stored in the register. For MOV.W, the
original contents of the 16-bit general register must be even.
Addressing Modes
Addressing Modes
Address Modes
Register direct
Register indirect
Register indirect with displacement
Register indirect with post-increment
Register indirect with pre-decrement
Absolute address
Immediate
Program-counter relative
Memory indirect
Addressing Modes
Symbol
Rn
@Rn
@(d:16, Rn)
@Rn+
@–Rn
@aa:8 or @aa:16
#xx:8 or #xx:16
@(d:8, PC)
@@aa:8
Rev. 6.00 Sep 12, 2006 page 23 of 526
REJ09B0326-0600
Section 2 CPU