UPD78F0550MA-FAA-AX Renesas Electronics America, UPD78F0550MA-FAA-AX Datasheet - Page 225

• Manufacturer Part Number: UPD78F0550MA-FAA-AX
• Description: MCU 8BIT 16-SSOP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx2-Lr

Specifications of UPD78F0550MA-FAA-AX

• Package / Case: *
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 10MHz
• Number Of I /o: 12
• Core Processor: 78K/0
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Program Memory Size: 4KB (4K x 8)
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Peripherals: LVD, POR, PWM, WDT
• Connectivity: I²C, LIN, UART/USART
• Core Size: 8-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Address: FFBDH
Symbol
TOC00
The value of this bit is always “0” when it is read. Do not set this bit to 1 in a mode other than the one-
shot pulse output mode.
If it is set to 1, TM00 is cleared and started.
One-shot pulse output operates correctly in the free-running timer mode or clear & start mode entered by
TI000 pin valid edge input.
The one-shot pulse cannot be output in the clear & start mode entered upon a match between TM00 and
CR000.
The interrupt signal (INTTM010) is generated even when TOC004 = 0.
The interrupt signal (INTTM000) is generated even when TOC001 = 0.
OSPT00
OSPE00
TOC004
TOC001
TOE00
LVS00
LVS00 and LVR00 can be used to set the initial value of the TO00 output level. If the initial value does
not have to be set, leave LVS00 and LVR00 as 00.
Be sure to set LVS00 and LVR00 when TOE00 = 1.
LVS00, LVR00, and TOE00 being simultaneously set to 1 is prohibited.
LVS00 and LVR00 are trigger bits. By setting these bits to 1, the initial value of the TO00 output level
can be set. Even if these bits are cleared to 0, TO00 output is not affected.
The values of LVS00 and LVR00 are always 0 when they are read.
For how to set LVS00 and LVR00, refer to 6.5.2 Setting LVS00 and LVR00.
The actual TO00/TI010/P01 pin output is determined depending on PM01 and P01, besides TO00
output.
Figure 6-8. Format of 16-Bit Timer Output Control Register 00 (TOC00)
7
0
0
1
0
1
0
1
0
0
1
1
0
1
0
1
After reset: 00H
One-shot pulse output
Successive pulse output
One-shot pulse output
Disables inversion operation
Enables inversion operation
Disables inversion operation
Enables inversion operation
Disables output (TO00 output fixed to low level)
Enables output
OSPT00
LVR00
<6>
0
1
0
1
CHAPTER 6 16-BIT TIMER/EVENT COUNTER 00
R/W
Preliminary User’s Manual U19111EJ2V1UD
No change
Initial value of TO00 output is low level (TO00 output is cleared to 0).
Initial value of TO00 output is high level (TO00 output is set to 1).
Setting prohibited
OSPE00
<5>
TO00 output control on match between CR010 and TM00
TO00 output control on match between CR000 and TM00
One-shot pulse output trigger via software
One-shot pulse output operation control
TOC004
4
TO00 output control
Setting of TO00 output status
LVS00
<3>
LVR00
<2>
TOC001
1
TOE00
<0>
225