UPD78F0550MA-FAA-AX Renesas Electronics America, UPD78F0550MA-FAA-AX Datasheet - Page 312

• Manufacturer Part Number: UPD78F0550MA-FAA-AX
• Description: MCU 8BIT 16-SSOP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx2-Lr

Specifications of UPD78F0550MA-FAA-AX

• Package / Case: *
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 10MHz
• Number Of I /o: 12
• Core Processor: 78K/0
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Program Memory Size: 4KB (4K x 8)
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Peripherals: LVD, POR, PWM, WDT
• Connectivity: I²C, LIN, UART/USART
• Core Size: 8-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

312
Note
Cautions 1. When TMHE0 = 1, setting the other bits of TMHMD0 is prohibited. However, TMHMD0 can be
Remarks 1. f
2.
2. TMC506: Bit 6 of 8-bit timer mode control register 50 (TMC50)
2. In the PWM output mode, be sure to set the 8-bit timer H compare register 10 (CMP10) when
3. The actual TOH0/P15 pin output is determined depending on PM15 and P15, besides TOH0
Note the following points when selecting the TM50 output as the count clock.
It is not necessary to enable (TOE50 = 1) TO50 output in any mode.
Mode in which the count clock is cleared and started upon a match of TM50 and CR50 (TMC506 = 0)
Start the operation of 8-bit timer/event counter 50 first and then enable the timer F/F inversion
operation (TMC501 = 1).
PWM mode (TMC506 = 1)
Start the operation of 8-bit timer/event counter 50 first and then set the count clock to make the duty =
50%.
TMC501: Bit 1 of TMC50
PRS
refreshed (the same value is written).
starting the timer count operation (TMHE0 = 1) after the timer count operation was stopped
(TMHE0 = 0) (be sure to set again even if setting the same value to CMP10).
output.
: Peripheral hardware clock frequency
CHAPTER 8 8-BIT TIMERS H0 AND H1
Preliminary User’s Manual U19111EJ2V1UD