UPD78F0550MA-FAA-AX Renesas Electronics America, UPD78F0550MA-FAA-AX Datasheet - Page 50

• Manufacturer Part Number: UPD78F0550MA-FAA-AX
• Description: MCU 8BIT 16-SSOP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx2-Lr

Specifications of UPD78F0550MA-FAA-AX

• Package / Case: *
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 10MHz
• Number Of I /o: 12
• Core Processor: 78K/0
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Program Memory Size: 4KB (4K x 8)
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Peripherals: LVD, POR, PWM, WDT
• Connectivity: I²C, LIN, UART/USART
• Core Size: 8-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

(1) Port mode
(2) Control mode
2.2.4 P30 to P33 (port 3)
and clock input and data I/O for flash memory programmer/on-chip debugger.
(1) Port mode
(2) Control mode
50
P30/TOH1/TI51/INTP1
P30 to P33 function as an I/O port. These pins also function as pins for external interrupt request input, timer I/O,
The following operation modes can be specified in 1-bit units.
Caution ANI0/P20 to ANI7/P27 are set in the analog input mode after release of reset.
P20 to P27 function as an I/O port. P20 to P27 can be set to input or output port in 1-bit units using port mode
register 2 (PM2).
P20 to P27 function as A/D converter analog input, operational amplifier I/O, and PGA input.
(a) ANI0 to ANI7
(b) AMP0+, AMP0-
(c) AMP0OUT
(d) PGAIN
P30 to P33 function as an I/O port. P30 to P33 can be set to input or output port in 1-bit units using port mode
register 3 (PM3). Use of an on-chip pull-up resistor can be specified by pull-up resistor option register 3 (PU3).
P30 to P33 function as external interrupt request input, timer I/O, and clock input and data I/O for flash memory
programmer/on-chip debugger.
(a) INTP1 to INTP4
( PD78F055x)
78K0/KY2-L
16 Pins
These are A/D converter analog input pins. When using these pins as analog input pins, refer to (5)
ANI0/P20 to ANI7/P27 and ANI8/P10 to ANI10/P12 in 12.6 Cautions for A/D Converter.
These are operational amplifier 0 input pins.
This is an operational amplifier 0 output pin.
This is a PGM (Programmable gain amplifier) input pin.
These are the external interrupt request input pins for which the valid edge (rising edge, falling edge, or both
rising and falling edges) can be specified.
P30/TOH1/TI51/INTP1
P31/INTP2/TOOLC1
P32/INTP3/TOOLD1
( PD78F056x)
78K0/KA2-L
20 Pins
Preliminary User’s Manual U19111EJ2V1UD
CHAPTER 2 PIN FUNCTIONS
P30/INTP1
P31/INTP2/TOOLC1
P32/INTP3/TOOLD1
P33/TI51/TO51/INTP4
( PD78F057x)
78K0/KB2-L
30 Pins
P30/INTP1
P31/INTP2/TOOLC1
P32/INTP3/TOOLD1
P33/TI51/TO51/INTP4
44 Pins
( PD78F058x)
78K0/KC2-L
P30/INTP1
P31/INTP2/TOOLC1
P32/INTP3/TOOLD1
P33/TI51/TO51/INTP4
48 Pins