UPD78F0550MA-FAA-AX Renesas Electronics America, UPD78F0550MA-FAA-AX Datasheet - Page 658

• Manufacturer Part Number: UPD78F0550MA-FAA-AX
• Description: MCU 8BIT 16-SSOP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx2-Lr

Specifications of UPD78F0550MA-FAA-AX

• Package / Case: *
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 10MHz
• Number Of I /o: 12
• Core Processor: 78K/0
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Program Memory Size: 4KB (4K x 8)
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Peripherals: LVD, POR, PWM, WDT
• Connectivity: I²C, LIN, UART/USART
• Core Size: 8-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

programmer. The response names sent from the 78K0/Kx2-L microcontrollers are listed below.
658
Verify
Erase
Blank check
Write
Getting information
Security
Others
The 78K0/Kx2-L microcontrollers return a response for the command issued by the dedicated flash memory
Classification
ACK
NAK
Verify
Chip Erase
Block Erase
Block Blank Check
Programming
Silicon Signature
Version Get
Checksum
Security Set
Reset
Baud Rate Set
Command Name
Response Name
Table 25-3. Flash Memory Control Commands
Preliminary User’s Manual U19111EJ2V1UD
Table 25-4. Response Names
CHAPTER 25 FLASH MEMORY
Compares the contents of a specified area of the flash memory with
data transmitted from the programmer.
Erases the entire flash memory.
Erases a specified area in the flash memory.
Checks if a specified block in the flash memory has been correctly
erased.
Writes data to a specified area in the flash memory.
Gets 78K0/Kx2-L information (such as the part number and flash
memory configuration).
Gets the 78K0/Kx2-L version and firmware version.
Gets the checksum data for a specified area.
Sets security information.
Used to detect synchronization status of communication.
Sets baud rate when UART communication mode is selected.
Acknowledges command/data.
Acknowledges illegal command/data.
Function
Function