R88M-WP20030H-BW Omron, R88M-WP20030H-BW Datasheet - Page 277

• Manufacturer Part Number: R88M-WP20030H-BW
• Description: SERVO MOTOR 200W 200V W/BRAKE
• Manufacturer: Omron

Specifications of R88M-WP20030H-BW

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: R88MWP20030HBW

Operation
• Do not set 7 (always ON).
• If setting 8 (always OFF), when the alarm is cancelled, turn ON the power or reset the alarm using the
• Settings are the same as for Pn50A.1.
• If Pn50A.0 is set to 0, you cannot change the pin number. Settings 0 to 6 and 9 to F are disabled, and all
• To change the pin number, set Pn50A.0 to 1.
• Settings are the same as for Pn50A.1.
• If Pn50A.0 is set to 0, you cannot change the pin number. Settings 0 to 6 and 9 to F are disabled, and all
• To change the pin number, set Pn50A.0 to 1.
• Settings are the same as for Pn50A.1.
• If Pn50A.0 is set to 0, you cannot change the pin number. Settings 0 to F are all disabled.
• To change the pin number, set Pn50A.0 to 1.
• Settings are the same as for Pn50A.1.
• If Pn50A.0 is set to 0, you cannot change the pin number. Settings 0 to F are all disabled.
• To change the pin number, set Pn50A.0 to 1.
• Settings are the same as for Pn50A.1.
• If Pn50A.0 is set to 0, you cannot change the pin number. Settings 0 to F are all disabled.
• To change the pin number, set Pn50A.0 to 1.
Pn50b.2
Setting
range
Pn50b.3
Setting
range
Pn50C.0
Setting
range
Pn50C.1
Setting
range
Pn50C.2
Setting
range
Pn50C.3
Setting
range
operation keys.
are set to CN1, pin 45 enabled by L input. Settings 7 and 8 are both enabled.
are set to CN1, pin 46 enabled by L input. Settings 7 and 8 are both enabled.
Input signal selection 2 –– PCL signal (forward rotation current limit) input terminal allocation
(All operation modes)
0 to F
Input signal selection 2 –– NCL signal (reverse rotation current limit) input terminal allocation
(All operation modes)
0 to F
Input signal selection 3 –– RDIR signal (rotation direction command) input terminal allocation
(internally-set speed control)
0 to F
Input signal selection 3 –– SPD1 signal (speed selection command 1) input terminal allocation
(internally-set speed control)
0 to F
Input signal selection 3 –– SPD2 signal (speed selection command 2) input terminal allocation
(internally-set speed control)
0 to F
Input signal selection 3 –– TVSEL signal (control mode switching) input terminal allocation
(Switching control)
0 to F
Unit
Unit
Unit
Unit
Unit
Unit
---
---
---
---
---
---
Default
setting
Default
setting
Default
setting
Default
setting
Default
setting
Default
setting
5
6
8
8
8
8
Restart
power?
Restart
power?
Restart
power?
Restart
power?
Restart
power?
Restart
power?
Chapter 4
Yes
Yes
Yes
Yes
Yes
Yes
4-39