Z8F16800144ZCOG Zilog, Z8F16800144ZCOG Datasheet - Page 19

• Manufacturer Part Number: Z8F16800144ZCOG
• Description: KIT DEV FOR Z8F642 MCU 44 PIN
• Manufacturer: Zilog
• Series: Z8 Encore!®r
• Type: MCUr

Specifications of Z8F16800144ZCOG

• Contents: Hardware, Software and Documentation
• For Use With/related Products: Z8F642
• For Use With: 269-4661 - KIT ACC ETHERNET SMART CABLE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 269-4678

PS025011-1010
Non-Volatile Data Storage
Internal Precision Oscillator
Crystal Oscillator
Secondary Oscillator
10-Bit Analog-to-Digital Converter
Low-Power Operational Amplifier
Analog Comparator
Temperature Sensor
The Non-Volatile Data Storage (NVDS) uses a hybrid hardware/software scheme to 
implement a byte-programmable data memory and is capable of over 100,000 write
cycles.
The internal precision oscillator (IPO) is a trimmable clock source which requires no
external components. You can select IPO frequency from one of eight frequencies 
(43.2 kHz to 11.0592 MHz) and is available with factory-trimmed calibration data.
The crystal oscillator circuit provides highly accurate clock frequencies using 
an external crystal, ceramic resonator, or RC network.
The secondary oscillator is a low-power oscillator, which is optimized for use with a 
32 kHz watch crystal. It can be used as timer/counter clock source in any mode.
The Analog-to-Digital Converter (ADC) converts an analog input signal to a 
10-bit binary number. The ADC supports up to eight analog input sources multiplexed
with GPIO ports.
The low-power operational amplifier (LPO) is a general-purpose operational amplifier
primarily targeted for current sense applications. The LPO output can be internally routed
to the ADC or externally to a pin.
The analog comparator compares the signal at an input pin with either an internal
programmable voltage reference or a second-input pin. The comparator output is used to
either drive an output pin or to generate an interrupt.
The temperature sensor produces an analog output proportional to the device temperature.
This signal is sent either to the ADC or to the analog comparator.
P R E L I M I N A R Y
Z8 Encore! XP
Product Specification
®
F1680 Series
Overview
5