R0K572011S000BE Renesas Electronics America, R0K572011S000BE Datasheet - Page 395

• Manufacturer Part Number: R0K572011S000BE
• Description: KIT STARTER FOR SH7201
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K572011S000BE

• Contents: CPU Board, LCD Display Module, E8 Emulator, Cable, QuickStart Guide and CD-ROM
• For Use With/related Products: SH7201
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

SH7201 Group
This LSI has an on-chip multi-function timer pulse unit 2 (MTU2) that comprises six 16-bit timer
channels.
12.1
• Up to 16 pulse input/output lines and three pulse input lines
• Selection of eight counter input clocks for each channel (four clocks for channel 5)
• The following operations can be set for channels 0 to 4:
• Buffer operation settable for channels 0, 3, and 4
• Phase counting mode settable independently for each of channels 1 and 2
• Cascade connection operation
• Fast access via internal 16-bit bus
• 28 interrupt sources
• Automatic transfer of register data
• A/D converter start trigger can be generated
• Module standby mode can be settable
• A total of six-phase waveform output, which includes complementary PWM output, and
• AC synchronous motor (brushless DC motor) drive mode using complementary PWM output
• Dead time compensation counter available in channel 5
• In complementary PWM mode, interrupts at the crest and trough of the counter value and A/D
R01UH0026EJ0300 Rev. 3.00
Sep 24, 2010
⎯ Waveform output at compare match
⎯ Input capture function
⎯ Counter clear operation
⎯ Multiple timer counters (TCNT) can be written to simultaneously
⎯ Simultaneous clearing by compare match and input capture is possible
⎯ Register simultaneous input/output is possible by synchronous counter operation
⎯ A maximum 12-phase PWM output is possible in combination with synchronous operation
positive and negative phases of reset PWM output by interlocking operation of channels 3 and
4, is possible.
and reset PWM output is settable by interlocking operation of channels 0, 3, and 4, and the
selection of two types of waveform outputs (chopping and level) is possible.
converter start triggers can be skipped.
Section 12 Multi-Function Timer Pulse Unit 2 (MTU2)
Features
Section 12 Multi-Function Timer Pulse Unit 2 (MTU2)
Page 367 of 1190