R0K572011S000BE Renesas Electronics America, R0K572011S000BE Datasheet - Page 486

• Manufacturer Part Number: R0K572011S000BE
• Description: KIT STARTER FOR SH7201
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K572011S000BE

• Contents: CPU Board, LCD Display Module, E8 Emulator, Cable, QuickStart Guide and CD-ROM
• For Use With/related Products: SH7201
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Section 12 Multi-Function Timer Pulse Unit 2 (MTU2)
(3)
The TCNT value can be transferred to TGR on detection of the TIOC pin input edge.
Rising edge, falling edge, or both edges can be selected as the detected edge. For channels 0 and 1,
it is also possible to specify another channel's counter input clock or compare match signal as the
input capture source.
Note: When another channel's counter input clock is used as the input capture input for channels
(a)
Figure 12.10 shows an example of the input capture operation setting procedure.
Page 458 of 1190
Input Capture Function:
Example of Input Capture Operation Setting Procedure
0 and 1, Pφ/1 should not be selected as the counter input clock used for input capture
input. Input capture will not be generated if Pφ/1 is selected.
Figure 12.10 Example of Input Capture Operation Setting Procedure
<Input capture operation>
Select input capture input
Input selection
Start count
[1]
[2]
[1] Designate TGR as an input capture
[2] Set the CST bit in TSTR to 1 to start
register by means of TIOR, and select
rising edge, falling edge, or both edges
as the input capture source and input
signal edge.
the count operation.
R01UH0026EJ0300 Rev. 3.00
SH7201 Group
Sep 24, 2010