SC1200UFH-266 AMD (ADVANCED MICRO DEVICES), SC1200UFH-266 Datasheet - Page 238

• Manufacturer Part Number: SC1200UFH-266
• Manufacturer: AMD (ADVANCED MICRO DEVICES)

Specifications of SC1200UFH-266

• Operating Temperature (min): 0C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Lead Free Status / Rohs Status: Not Compliant

238
Offset 02h-03h
Note:
Bit
15
14
13
6
5
4
3
2
1
0
Reading this register clears all the SMI status bits except for the “read only” bits, because they have a second level of status
reporting. Clearing the second level status bits also clears the top level (except for GPIOs).
GPIO SMIs have third level of SMI status reporting at F0BAR0+I/O Offset 0Ch/1Ch. Clearing the third level GPIO status bits
also clears the second and top levels.
A read-only “Mirror” version of this register exists at F1BAR0+I/O Offset 00h. If the value of the register must be read without
clearing the SMI source (and consequently de-asserting SMI), F1BAR0+I/O Offset 00h can be read instead.
Description
SMI Source is a VGA Timer Event. Indicates whether or not an SMI was caused by the expiration of the VGA Timer (F0
Index 8Eh).
0: No.
1: Yes.
To enable SMI generation, set F0 Index 83h[3] to 1.
SMI Source is Video Retrace. Indicates whether or not an SMI was caused by a video retrace event as decoded from the
internal serial connection (PSERIAL register, bit 7) from the GX1 module.
0: No.
1: Yes.
To enable SMI generation, set F0 Index 83h[2] to 1.
Reserved. Reads as 0.
SMI Source is LPC. Indicates whether or not an SMI was caused by the LPC interface.
0: No.
1: Yes.
The next level (second level) of SMI status is at F0BAR1+I/O Offset 1Ch[6:5].
SMI Source is ACPI. Indicates whether or not an SMI was caused by an access (read or write) to one of the ACPI registers
(F1BAR1).
0: No.
1: Yes.
The next level (second level) of SMI status is at F1BAR0+I/O Offset 20h.
SMI Source is Audio Subsystem. Indicates whether or not an SMI was caused by the audio subsystem.
0: No.
1: Yes.
The next level (second level) of SMI status is at F3BAR0+Memory Offset 10h/12h.
SMI Source is Power Management Event. Indicates whether or not an SMI was caused by one of the power management
resources (except for GP timers, UDEFx and PCI/ISA function traps that are reported in bit 9).
0: No.
1: Yes.
The next level (second level) of SMI status is at F0 Index 84h-F4h/87h-F7h.
Suspend Modulation Enable Mirror. (Read to Clear)
This bit mirrors the Suspend Mode Configuration bit (F0 Index 96h[0]). It is used by the SMI handler to determine if the SMI
Speedup Disable Register (F1BAR0+I/O Offset 08h) must be cleared on exit.
SMI Source is USB. (Read to Clear) Indicates whether or not an SMI was caused by USB activity.
0: No.
1: Yes.
To enable SMI generation, set F5BAR0+I/O Offset 00h[20:19] to 11.
SMI Source is Warm Reset Command. (Read to Clear) Indicates whether or not an SMI was caused by Warm Reset
command
0: No.
1: Yes.
Table 6-33. F1BAR0+I/O Offset: SMI Status Registers (Continued)
32579B
Top Level PME/SMI Status Register (RO/RC)
Core Logic Module - SMI Status and ACPI Registers - Function 1
AMD Geode™ SC1200/SC1201 Processor Data Book
Reset Value: 0000h