SC1200UFH-266 AMD (ADVANCED MICRO DEVICES), SC1200UFH-266 Datasheet - Page 321

• Manufacturer Part Number: SC1200UFH-266
• Manufacturer: AMD (ADVANCED MICRO DEVICES)

Specifications of SC1200UFH-266

• Operating Temperature (min): 0C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Lead Free Status / Rohs Status: Not Compliant

Video Processor Module
7.2.2.2
The Video Processor implements up to 8:1 horizontal
downscaling with 4-tap filtering for horizontal interpolation.
Filtering is performed on video data input to the Video Pro-
cessor. This data is fed to the filter and then to the down-
scaler. There is a bypass path for both filtering and
downscaling logic. If this bypass is enabled, video data is
written directly into the line buffers. (See Figure 7-8.)
Filtering
There are four 4-bit coefficients which can have pro-
grammed values of 0 to 15. The filter coefficients can be
programmed via the Video Downscaler Coefficient register
(F4BAR0+Memory Offset 40h) to increase picture quality.
Horizontal Downscaler
The Video Processor supports horizontal downscaling. The
downscaler can be implemented in the Video Processor to
shrink the video window by a factor of up to 8:1, in 1-pixel
increments. The downscaler factor (m) is programmed in
the Video Downscaler Control register (F4BAR0+Memory
Offset 3Ch[4:1]). If bit 0 of this register is set to 0, the down-
scaler logic is bypassed.
The horizontal downscaler supports downscaling of video
data input format YUV 4:2:2 only.
The downscaler supports up to 29 downscaler factors.
There are two types of factors:
• Type A is (1/m+1). One pixel is retained, and m pixels
• Type B is (m/m+1). m pixels are retained, and one pixel
Bit
(F4BAR0+Memory Offset 3Ch) selects the type of down-
scaling factor to be used.
Note: There is no vertical downscaling in the Video Pro-
AMD Geode™ SC1200/SC1201 Processor Data Book
are dropped. This enables downscaling factors of 1/16,
1/15, 1/14, 1/13, 1/12, 1/11, 1/10, 1/9,1/8, 1/7, 1/6, 1/5,
1/4, 1/3, and 1/2.
is dropped. This enables downscaling factors of 2/3, 3/4,
4/5, 5/6, 6/7, 7/8, 8/9, 9/10, 10/11, 11/12, 12/13, 13/14,
14/15, and 15/16.
6
cessor.
of
Horizontal Downscaler with 4-Tap Filtering
the
Video
Video
Input
Downscaler
Figure 7-8. Horizontal Downscaler Block Diagram
Coefficients
Filtering
4-Tap
4x4
Control
register
Maintaining Aspect Ratio
The main purpose of the horizontal downscaler is to main-
tain the aspect ratio of graphics data displayed on a TV,
which was originally generated for CRT display.
NTSC has an aspect ratio that is slightly different than a
CRT. When graphics is generated for a CRT and is dis-
played on a TV, the resulting TV image is narrowed. To cor-
rect the aspect ratio, graphics data should be generated in
640x480 resolution. The full screen video is in 720x480
resolution. The 4-tap horizontal downscaler must be
enabled to bring the video data down to the same resolu-
tion as the graphics data to allow for proper mixing/blend-
ing. In the TVOUT block (see Section 7.2.4 on page 329)
there is a horizontal upscaler/downscaler which is used to
bring the mixed/blended data back up to the required
720x480 resolution for TV. This process stretches the
graphics data horizontally and corrects the aspect ratio.
PAL also has an aspect ratio different than a CRT. But
instead of the graphics being narrowed, it is stretched. To
correct this aspect ratio error the graphics data should be
generated in 768x576 resolution. The full screen video res-
olution is 720x576 and it must be scaled up using the hori-
zontal upscaler (see Section 7.2.2.5) to 768x576. In the
TVOUT block the horizontal upscaler/downscaler is used to
downscale the mixed/blended data to the required 720x576
resolution. This process narrows the graphics data horizon-
tally and corrects the aspect ratio.
For both NTSC and PAL, using the two scalers reduces the
quality of the video. Graphics data aspect ratio correction
should only be done when the graphics data (such as inter-
net content) is generated expecting a CRT display’s aspect
ratio. When graphics data is the only content viewed, this 4-
tap horizontal downscaler is not used but the TVOUT
block’s horizontal upscaler should still be used for graphics
data aspect ratio correction.
Downscaler
Downscale
Horizontal
Bypass
Factors
32579B
To Line
Buffers
321