ST52F513G3M6 STMicroelectronics, ST52F513G3M6 Datasheet - Page 108

• Manufacturer Part Number: ST52F513G3M6
• Manufacturer: STMicroelectronics

Specifications of ST52F513G3M6

• Cpu Family: ST52
• Device Core Size: 8b
• Frequency (max): 20MHz
• Interface Type: I2C/SCI/SPI
• Program Memory Type: Flash
• Program Memory Size: 8KB
• Total Internal Ram Size: 256Byte
• # I/os (max): 22
• Number Of Timers - General Purpose: 2
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 2.7V
• On-chip Adc: 8-chx10-bit
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 28
• Package Type: SO
• Lead Free Status / Rohs Status: Compliant

ST52510xx ST52513xx
16 ELECTRICAL CHARACTERISTICS
16.1 Parameter Conditions
Unless otherwise specified, all voltages are
referred to V
16.1.1 Minimum and Maximum values. Unless
otherwise specified, the minimum and maximum
values are guaranteed in the worst conditions of
environment temperature, supply voltage and
frequencies by tests in production on 100% of the
devices with an environmental temperature at
T
temperature range).
Data are based on characterization results, design
simulation and/or technology characteristics are
indicated in the table footnotes and are not tested
in production. The minimum and maximum values
are based on characterization and refer to sample
tests, representing the mean value plus or minus
three times the standard deviation (mean 3 ).
Figure 16.1 Pin loading conditions
108/136
A
=25 C and T
C
L
ss.
A
=T
A
max (given by the selected
ST52 PIN
16.1.2 Typical curves.
Unless otherwise specified, all typical curves are
provided only as design guidelines and are not
tested.
16.1.3 Typical values.
Unless otherwise specified, typical data is based
on T
design guidelines and are not tested.
16.1.4 Loading capacitor. The loading condition
used for pin parameter measurement is illustrated
in
16.1.5 Pin input voltage.
Input voltage measurement on a pin of the device
is described in
Figure 16.2 Pin input Voltage
Figure
A
=25 C, V
16.1.
V
IN
Figure 16.2
DD
=5V. They are provided only as
ST52 PIN