ST52F513G3M6 STMicroelectronics, ST52F513G3M6 Datasheet - Page 81

• Manufacturer Part Number: ST52F513G3M6
• Manufacturer: STMicroelectronics

Specifications of ST52F513G3M6

• Cpu Family: ST52
• Device Core Size: 8b
• Frequency (max): 20MHz
• Interface Type: I2C/SCI/SPI
• Program Memory Type: Flash
• Program Memory Size: 8KB
• Total Internal Ram Size: 256Byte
• # I/os (max): 22
• Number Of Timers - General Purpose: 2
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 2.7V
• On-chip Adc: 8-chx10-bit
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 28
• Package Type: SO
• Lead Free Status / Rohs Status: Compliant

PWM/Timer 1 Capture Low Input Register
(PWM1_CAPTURE_L)
Input Register 30 (01Eh) Read only
Reset Value: 0000 0000 (00h)
Bit 7-0: T1CP7-0 PWM/Timer 1 Capture LSB
In this register the counter value after the last stop
can be read.
12.6.3 PWM/Timer 1 Output Registers.
PWM/Timer 1 Counter High Output Register
(PWM1_COUNT_OUT_H)
Output Register 11 (0Bh) Write only
Reset Value: 0000 0000 (00h)
Bit 7-0: T1CO15-8 PWM/Timer 1 Counter MSB
This register is used to write the Timer 1 Counter
value (MSB).
Note: this register is latched after writing the LSB
part (PWM1_COUNT_OUT_L: see below). For this
reason, this register must be written before the
LSB.
PWM/Timer 1 Counter Low Output Register
(PWM1_COUNT_OUT_L)
Output Register 12 (0Ch) Write only
Reset Value: 0000 0000 (00h)
Bit 7-0: T1CO7-0 PWM/Timer 1 Counter LSB
This register is used to write the Timer 1 Counter
value (LSB).
T1CO15 T1CO14 T1CO13 T1CO12 T1CO11 T1CO10 T1CO9
T1CO7
T1CP7
7
7
7
T1CP6
T1CO6
T1CP5
T1CO5
T1CP4
T1CO4
T1CP3
T1CO3
T1CO2
T1CP2
T1CO1
T1CP1
T1CO8
T1CO0
T1CP0
0
0
0
Note:
PWM1_COUNT_OUT_x couple is latched in the
internal registers of the peripherals. For this reason
this register should be written after the MSB one.
PWM/Timer 1 Reload High Output Register
(PWM1_RELOAD_H)
Output Register 13 (0Dh) Write only
Reset Value: 1111 1111 (0FFh)
Bit 7-0: T1REL15-8 PWM/Timer 1 Reload MSB
This register is used to write the Timer 1 Reload
value (MSB).
Note: this register is latched after writing the LSB
part (PWM1_RELOAD_L: see below). For this
reason, this register must be written before the
LSB.
PWM/Timer 1 Reload Low Output Register
(PWM0_RELOAD_L)
Output Register 14 (0Eh) Write only
Reset Value: 1111 1111 (0FFh)
Bit 7-0: T1REL7-0 PWM/Timer 1 Reload LSB
This register is used to write the Timer 1 Reload
value (LSB).
Note:
PWM1_RELOAD_x couple is latched in the
internal registers of the peripherals. For this
reason, this register should be written after the
MSB one.
T1REL15 T1REL14 T1REL13 T1REL12 T1REL11 T1REL10 T1REL9 T1REL8
T1REL7 T1REL6 T1REL5 T1REL4 T1REL3 T1REL2 T1REL1 T01REL0
7
7
by
by
writing
writing
ST52510xx ST52513xx
this
this
register,
register,
81/136
0
0
the
the