PI7C8152BMAE Pericom Semiconductor, PI7C8152BMAE Datasheet - Page 75

• Manufacturer Part Number: PI7C8152BMAE
• Description: IC PCI-PCI BRIDGE 2PORT 160-MQFP
• Manufacturer: Pericom Semiconductor

Specifications of PI7C8152BMAE

• Applications: *
• Interface: *
• Voltage - Supply: *
• Package / Case: 160-MQFP, 160-PQFP
• Mounting Type: Surface Mount
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Operating Supply Voltage: 3 V to 3.6 V
• Supply Current (max): 246 mA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

12.1.26
12.1.27
INTERRUPT PIN REGISTER – OFFSET 3Ch
BRIDGE CONTROL REGISTER – OFFSET 3Ch
Bit
15:8
Bit
16
17
18
19
20
21
Function
Interrupt Pin
Function
Parity Error
Response
S_SERR_L
enable
ISA enable
VGA enable
Reserved
Master Abort
Mode
Type
R/O
Type
R/W
R/W
R/W
R/W
R/O
R/W
Page 75 of 90
Description
Interrupt pin not supported on the PI7C8152x
Read as 0 to indicate PI7C8152x does not support the interrupt pin
Reserved. Returns 0 when read. Reset to 0
Description
Controls the bridge’s response to parity errors on the secondary
interface.
0: ignore address and data parity errors on the secondary interface
1: enable parity error reporting and detection on the secondary
interface
Reset to 0
Controls the forwarding of S_SERR_L to the primary interface.
0: disable the forwarding of S_SERR_L to primary interface
1: enable the forwarding of S_SERR_L to primary interface
Reset to 0
Modifies the bridge’s response to ISA I/O addresses, applying only
to those addresses falling within the I/O base and limit address
registers and within the first 64KB of PCI I/O space.
0: forward all I/O addresses in the range defined by the I/O base and
I/O limit registers
1: blocks forwarding of ISA I/O addresses in the range defined by the
I/O base and I/O limit registers that are in the first 64KB of I/O space
that address the last 768 bytes in each 1KB block. Secondary I/O
transactions are forwarded upstream if the address falls within the
last 768 bytes in each 1KB block
Reset to 0
Controls the bridge’s response to VGA compatible addresses.
0: does not forward VGA compatible memory and I/O addresses
from primary to secondary
1: forward VGA compatible memory and I/O addresses from primary
to secondary regardless of other settings
Reset to 0
Control’s bridge’s behavior responding to master aborts on
secondary interface.
0: does not report master aborts (returns FFFF_FFFFh on reads and
discards data on writes)
1: reports master aborts by signaling target abort if possible or by the
assertion of P_SERR_L if enabled
Reset to 0
2-PORT PCI-TO-PCI BRIDGE
October 16, 2003 – Revision 1.11
ADVANCE INFORMATION
PI7C8152A & PI7C8152B