mcf5307cft90b Freescale Semiconductor, Inc, mcf5307cft90b Datasheet - Page 151

• Manufacturer Part Number: mcf5307cft90b
• Description: Mcf5307 Coldfire Integrated Microprocessor User
• Manufacturer: Freescale Semiconductor, Inc

5.5.3.3 Command Set Descriptions
The following sections describe the commands summarized in Table 5-17.
Motorola reserves unassigned command opcodes for future expansion. Unused command
formats in any revision level perform a
• Results are returned in the two serial transfer cycles after the memory access
completes. For any command performing a byte-sized memory read operation, the
upper 8 bits of the response data are undefined and the referenced data is returned in
the lower 8 bits. The next command’s opcode is sent to the debug module during the
final transfer. If a memory or register access is terminated with a bus error, the error
status (S = 1, DATA = 0x0001) is returned instead of result data.
The BDM status bit (S) is 0 for normally completed
commands; S = 1 for illegal commands, not-ready responses,
and transfers with bus-errors. Section 5.5.2, “BDM Serial
Interface,” describes the receive packet format.
Freescale Semiconductor, Inc.
For More Information On This Product,
Chapter 5. Debug Support
Go to: www.freescale.com
NOP
NOTE:
and return an illegal command response.
Background Debug Mode (BDM)
5-23