s3c2410a Samsung Semiconductor, Inc., s3c2410a Datasheet - Page 106

• Manufacturer Part Number: s3c2410a
• Description: 16/32-bit Risc Arm Microprocessor
• Manufacturer: Samsung Semiconductor, Inc.

ARM INSTRUCTION SET
CPSR FLAGS
Setting the CPSR flags is optional, and is controlled by the S bit in the instruction. The N (Negative) and Z (Zero)
flags are set correctly on the result (N is made equal to bit 31 of the result, and Z is set if and only if the result is
zero). The C (Carry) flag is set to a meaningless value and the V (oVerflow) flag is unaffected.
INSTRUCTION CYCLE TIMES
MUL takes 1S + mI and MLA 1S + (m+1)I cycles to execute, where S and I are defined as sequential (S-cycle) and
internal (I-cycle), respectively.
ASSEMBLER SYNTAX
MUL{cond}{S} Rd,Rm,Rs
MLA{cond}{S} Rd,Rm,Rs,Rn
EXAMPLES
3-24
m
1
2
3
4
{cond}
{S}
Rd, Rm, Rs and Rn Expressions evaluating to a register number other than R15.
MUL
MLAEQS
R1,R2,R3
R1,R2,R3,R4
The number of 8-bit multiplier array cycles is required to complete the multiply,
which is controlled by the value of the multiplier operand specified by Rs. Its
possible values are as follows
If bits [32:8] of the multiplier operand are all zero or all one.
If bits [32:16] of the multiplier operand are all zero or all one.
If bits [32:24] of the multiplier operand are all zero or all one.
In all other cases.
Two-character condition mnemonic. See Table 3-2..
Set condition codes if S present
; R1:=R2*R3
; Conditionally R1:=R2*R3+R4, Setting condition codes.
S3C2410A