s3c2410a Samsung Semiconductor, Inc., s3c2410a Datasheet - Page 409

• Manufacturer Part Number: s3c2410a
• Description: 16/32-bit Risc Arm Microprocessor
• Manufacturer: Samsung Semiconductor, Inc.

S3C2410A
ADC AND TOUCH SCREEN INTERFACE
16
ADC & TOUCH SCREEN INTERFACE
OVERVIEW
The 10-bit CMOS analog to digital converter (ADC) of the S3C2410A is a recycling typed device with 8-channel
analog inputs. It converts the analog input signal into 10-bit binary digital codes at a maximum conversion rate of
500KSPS with 2.5 MHz A/D converter clock. The A/D converter operates with on-chip, sample-and-hold function and
power down mode is supported.
The S3C2410A supports Touch Screen Interface, which consists of a touch screen panel, four external transistors,
an external voltage source, AIN[7] and AIN[5] (see Figure 16-2).
Touch Screen Interface controls and selects control signals (nYPON, YMON, nXPON and XMON) and analog pads
(AIN[7], AIN[5]) which are connected with pads of touch screen panel and the external transistor for X-position
conversion and Y-position conversion.
Touch Screen Interface contains an external transistor control logic and an ADC interface logic with an interrupt
generation logic.
FEATURES
— Resolution: 10-bit
— Differential Linearity Error:
1.0 LSB
— Integral Linearity Error:
2.0 LSB
— Maximum Conversion Rate: 500 KSPS
— Low Power Consumption
— Power Supply Voltage: 3.3V
— Analog Input Range: 0 ~ 3.3V
— On-chip Sample-and-hold Function
— Normal Conversion Mode
— Separate X/Y position conversion Mode
— Auto (Sequential) X/Y Position Conversion Mode
— Waiting for Interrupt Mode
16-1