CJ1W-NC234 Omron, CJ1W-NC234 Datasheet - Page 369

• Manufacturer Part Number: CJ1W-NC234
• Description: High Speed Pulse Train 2 Axes
• Manufacturer: Omron

Specifications of CJ1W-NC234

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

CJ Position Control Units OPERATION MANUAL (CJ1W-NC214/234/414/434)
Automatic or Manual Replay
Replay Speed
Frame Advance
Operation Path Replay
Pointers that show the current location on position or speed graphs are displayed. The pointers
move on the graphs as time elapses.
Pointers that show the current location on position or speed graphs are displayed. The pointers
move on the graphs as time elapses.
The pointers will move automatically if you click the [replay] button (automatic replay).
When automatic replay is not in progress, you can move the cursor on the slider to replay the
status at any point in time (manual replay). The sequence number is displayed on the pointers
as the pointers move on the graphs. This allows you to easily confirm the sequence number
that is being replayed.
A factor can be set for the speed that is used for automatic replay. The factor is x1 when the
memory operation preview is started. The replay speed can be selected from x0.5, x1, and x2.
These will change the replay speed to half the normal speed, the normal speed, or twice the
normal speed.
The Frame Advance buttons can be used to quickly move the pointers to the starting point of
the next or previous sequence from the sequence where the pointers are currently displayed.
If a Frame Advance button is pressed during automatic replay, automatic replay will be stopped
and the pointers will move to the starting point of the next or previous sequence.
7-10 Memory Operation Preview with CX-Programmer
You can move the cursor on the slider
for manual replay.
You can change the replay speed for
automatic replay.
These buttons are to reverse the frame, start
automatic replay, and advance the frame.
7-68
7