CJ1W-NC434 Omron, CJ1W-NC434 Datasheet - Page 359

• Manufacturer Part Number: CJ1W-NC434
• Description: High Speed Pulse Train 4 Axes
• Manufacturer: Omron

Specifications of CJ1W-NC434

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

CJ Position Control Units OPERATION MANUAL (CJ1W-NC214/234/414/434)
Memory Operation Data Settings
Setting of Sequence No. 1
Set data for sequence No. 1 and No. 2 according to the operation.
Set the sequence data for moving the axis to 150.00 mm at a speed of 250 mm/s according to
the movement of the machine.
Axis 1 command
position
Command
Sequence start
condition
Sequence skip
condition
End pattern
Dwell timer
Positioning
completion input
monitor valid
M code
Axis specification
Data name
Set the position data.
Select [Positioning Operation Linear Interpolation
Operation].
Use a memory operation condition data number to set
the start condition.
Set [No Start Condition].
Use a memory operation condition data number to set
the start condition.
Set [No Condition].
Set the operation end pattern.
0: Individual
1: Automatic
2: Continuous 1 (Until the next sequence speed)
3: Continuous 2 (Acceleration/deceleration starts at the
4: Continuous 3 (Pass: Superimpose deceleration of the
If the end pattern is independent or automatic, set a
dwell time.
0: No dwell time
0.01 to 10.00s: Dwell time (10 ms unit)
Select the in-position check that applies when the
operating axis stops.
0: Not wait for the positioning completion
1: Wait for the positioning completion
Set the M code after positioning completed.
0: Without M code
1 to 499: M code that waits for the M code reset
500 to 999: M code that does not wait for the M code
reset
Set the axis to start. Issue a start command when each
bit turns ON.
Bit 0: Axis 1
Bit 1: Axis 2
Bit 2: Axis 3
Bit 3: Axis 4
next sequence)
present sequence and acceleration at the next
sequence)
Function
7-8 Sample Program
0001 hex
15000
value
500
Set
−
0
0
1
0
1
Command
[0.01 mm]
Unit
unit
−
−
−
−
−
−
−
−
7-58
7