MC68376BAMFT20 Freescale Semiconductor, MC68376BAMFT20 Datasheet - Page 246

• Manufacturer Part Number: MC68376BAMFT20
• Manufacturer: Freescale Semiconductor

Specifications of MC68376BAMFT20

• Cpu Family: 68K/M683xx
• Device Core: ColdFire
• Device Core Size: 32b
• Frequency (max): 20MHz
• Interface Type: QSPI/SCI
• Program Memory Type: ROM
• Program Memory Size: 8KB
• Total Internal Ram Size: 7.5KB
• # I/os (max): 18
• Number Of Timers - General Purpose: 2
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (max): 5.25V
• Operating Supply Voltage (min): 4.75V
• On-chip Adc: 16-chx10-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Mounting: Surface Mount
• Pin Count: 160
• Package Type: PQFP
• Lead Free Status / Rohs Status: Not Compliant

11.5.6 Fast Quadrature Decode (FQD)
11.5.7 Universal Asynchronous Receiver/Transmitter (UART)
11.5.8 Brushless Motor Commutation (COMM)
11-12
MOTOROLA
Multiple PWMs generated by MCPWM have two types of high time alignment: edge
aligned and center aligned. Edge aligned mode uses n + 1 TPU channels for n PWMs;
center aligned mode uses 2n + 1 channels. Center aligned mode allows a user-defined
“dead time” to be specified so that two PWMs can be used to drive an H-bridge without
destructive current spikes. This feature is important for motor control applications.
Refer to TPU programming note Multichannel Pulse-Width Modulation (MCPWM)
TPU Function (TPUPN05/D) for more information.
FQD is a position feedback function for motor control. It decodes the two signals from
a slotted encoder to provide the CPU32 with a 16-bit free running position counter.
FQD incorporates a “speed switch” which disables one of the channels at high speed,
allowing faster signals to be decoded. A time stamp is provided on every counter up-
date to allow position interpolation and better velocity determination at low speed or
when low resolution encoders are used. The third index channel provided by some en-
coders is handled by the NITC function.
Refer to TPU programming note Fast Quadrature Decode (FQD) TPU Function
(TPUPN02/D) for more information.
The UART function uses one or two TPU channels to provide asynchronous serial
communication. Data word length is programmable from one to 14 bits. The function
supports detection or generation of even, odd, and no parity. Baud rate is freely pro-
grammable and can be higher than 100 Kbaud. Eight bidirectional UART channels
running in excess of 9600 baud can be implemented.
Refer to TPU programming note Universal Asynchronous Receiver/Transmitter
(UART) TPU Function (TPUPN07/D) for more information.
This function generates the phase commutation signals for a variety of brushless mo-
tors, including three-phase brushless DC motors. It derives the commutation state di-
rectly from the position decoded in FQD, thus eliminating the need for hall effect
sensors.
The state sequence is implemented as a user-configurable state machine, thus
providing a flexible approach with other general applications. An offset parameter is
provided to allow all the switching angles to be advanced or retarded on the fly by the
CPU32. This feature is useful for torque maintenance at high speeds.
Refer to TPU programming note Brushless Motor Commutation (COMM) TPU Func-
tion (TPUPN09/D) for more information.
TIME PROCESSOR UNIT
USER’S MANUAL
MC68336/376