HD6412340 HITACHI [Hitachi Semiconductor], HD6412340 Datasheet - Page 522

• Manufacturer Part Number: HD6412340
• Description: H8S/2345 F-ZTAT Hardware Manual
• Manufacturer: HITACHI [Hitachi Semiconductor]

Bit 5—A/D Start (ADST): Selects starting or stopping on A/D conversion. Holds a value of 1
during A/D conversion.
The ADST bit can be set to 1 by software, a timer conversion start trigger, or the A/D external
trigger input pin (ADTRG).
Bit 5
ADST
0
1
Bit 4—Scan Mode (SCAN): Selects single mode or scan mode as the A/D conversion operating
mode. See section 14.4, Operation, for single mode and scan mode operation. Only set the SCAN
bit while conversion is stopped.
Bit 4
SCAN
0
1
Bit 3—Clock Select (CKS): Sets the A/D conversion time. Only change the conversion time
while ADST = 0.
Bit 3
CKS
0
1
Bits 2 to 0—Channel Select 2 to 0 (CH2 to CH0): Together with the SCAN bit, these bits select
the analog input channels.
Only set the input channel while conversion is stopped.
Description
Description
Single mode
Scan mode
Description
Conversion time = 266 states (max.)
Conversion time = 134 states (max.)
A/D conversion stopped
Single mode: A/D conversion is started. Cleared to 0 automatically when
Scan mode: A/D conversion is started. Conversion continues sequentially on the
conversion on the specified channel ends
selected channels until ADST is cleared to 0 by software, a reset, or
a transition to standby mode or module stop mode.
(Initial value)
(Initial value)
(Initial value)
509