C8051F34A-GMR Silicon Labs, C8051F34A-GMR Datasheet - Page 33

• Manufacturer Part Number: C8051F34A-GMR
• Description: 8-bit Microcontrollers - MCU 48 MIPS 64KB 10ADC
• Manufacturer: Silicon Labs

Specifications of C8051F34A-GMR

• Rohs: yes
• Core: 8051
• Processor Series: C8051
• Data Bus Width: 8 bit

Notes:
General:
Solder Mask Design:
Stencil Design:
Card Assembly:
1. All dimensions shown are in millimeters (mm) unless otherwise noted.
2. This Land Pattern Design is based on the IPC-7351 guidelines.
3. All metal pads are to be non-solder mask defined (NSMD). Clearance between
4. A stainless steel, laser-cut and electro-polished stencil with trapezoidal walls
5. The stencil thickness should be 0.125 mm (5 mils).
6. The ratio of stencil aperture to land pad size should be 1:1 for all pads.
7. A No-Clean, Type-3 solder paste is recommended.
8. The recommended card reflow profile is per the JEDEC/IPC J-STD-020
Figure 4.3. TQFP-48 Recommended PCB Land Pattern
the solder mask and the metal pad is to be 60 µm minimum, all the way around
the pad.
should be used to assure good solder paste release.
specification for Small Body Components.
Table 4.3. TQFP-48 PCB Land Pattern Dimensions
Dimension
C1
C2
X1
Y1
E
C8051F340/1/2/3/4/5/6/7/8/9/A/B/C/D
Rev. 1.3
8.30
8.30
0.20
1.40
Min
0.50 BSC
Max
8.40
8.40
0.30
1.50
33