MPC564CZP40 Freescale Semiconductor, MPC564CZP40 Datasheet - Page 885

• Manufacturer Part Number: MPC564CZP40
• Description: IC MPU 32BIT W/CODE COMP 388PBGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564CZP40

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 40MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 388-BGA
• Processor Series: MPC5xx
• Core: PowerPC
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: CAN, JTAG, QSPI, SCI, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 56
• Number Of Timers: 2
• Operating Supply Voltage: 0 V to 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (10 bit, 32 Channel)
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No

Freescale Semiconductor
7. Write EHV = 0.
8. If more information needs to be programmed go to step 3.
9. Write SES = 0 in the UC3FCTL register.
State
S1
Normal Operation:
Normal array reads and register accesses. The
block protect information can be modified.
Writing EHV = 0 before HVS = 0 causes the current program sequence to
ABORT. The location for which the program sequence was aborted may not
have been programmed with sufficient margins. The block containing that
location must be erased and reprogrammed before that block of the UC3F
array may be used reliably.
Reset
Table 21-7. Program Interlock State Descriptions
Mode
T1
MPC561/MPC563 Reference Manual, Rev. 1.2
Figure 21-9. Program State Diagram
S2
S1
T2
WARNING
T6
T10
T5
T3
T7
State
Next
S2
S3
S4
T2
T9
T4
Write PE = 0, SES = 1.
Transition Requirement
T8
S5
CDR3 Flash (UC3F) EEPROM
21-23