R5F21236KFP#U0 Renesas Electronics America, R5F21236KFP#U0 Datasheet - Page 119

• Manufacturer Part Number: R5F21236KFP#U0
• Description: IC R8C/23 MCU FLASH 48LQFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/R8C/Tiny/23r

Specifications of R5F21236KFP#U0

• Core Processor: R8C
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: CAN, I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, Voltage Detect, WDT
• Number Of I /o: 41
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 48-LQFP
• For Use With: RCDK8C - KIT DEV EVAL FOR CAN R8C/23R0E521237CPE00 - EMULATOR COMPACT R8C/20/21/22/23
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/22 Group, R8C/23 Group
Rev.2.00 Aug 20, 2008
REJ09B0251-0200
12.1.2
12.1.2.1
12.1.2.2
12.1.2.3
12.1.2.4
A software interrupt is generated when an instruction is executed. The software interrupts are non-maskable
interrupts.
The undefined instruction interrupt is generated when the UND instruction is executed.
The overflow interrupt is generated when the O flag is set to 1 (arithmetic operation overflow) and the INTO
instruction is executed. Instructions to set the O flag are:
ABS, ADC, ADCF, ADD, CMP, DIV, DIVU, DIVX, NEG, RMPA, SBB, SHA, SUB
A BRK interrupt is generated when the BRK instruction is executed.
An INT instruction interrupt is generated when the INT instruction is executed. The INT instruction can select
software interrupt numbers 0 to 63. Software interrupt numbers 3 to 31 are assigned to the peripheral function
interrupt. Therefore, the MCU executes the same interrupt routine when the INT instruction is executed as
when a peripheral function interrupt is generated. In software interrupt numbers 0 to 31, the U flag is saved to
the stack during instruction execution and set the U flag to 0 (ISP selected) before executing an interrupt
sequence. The U flag is restored from the stack when returning from the interrupt routine. In software interrupt
numbers 32 to 63, the U flag does not change state during instruction execution, and the selected SP is used.
Software Interrupts
Undefined Instruction Interrupt
Overflow Interrupt
BRK Interrupt
INT Instruction Interrupt
Page 97 of 501
12. Interrupts