R5F21236KFP#U0 Renesas Electronics America, R5F21236KFP#U0 Datasheet - Page 243

• Manufacturer Part Number: R5F21236KFP#U0
• Description: IC R8C/23 MCU FLASH 48LQFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/R8C/Tiny/23r

Specifications of R5F21236KFP#U0

• Core Processor: R8C
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: CAN, I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, Voltage Detect, WDT
• Number Of I /o: 41
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 48-LQFP
• For Use With: RCDK8C - KIT DEV EVAL FOR CAN R8C/23R0E521237CPE00 - EMULATOR COMPACT R8C/20/21/22/23
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/22 Group, R8C/23 Group
Rev.2.00 Aug 20, 2008
REJ09B0251-0200
Figure 14.74
TRDSRi register
TRDSRi register
TRDSRi register
TRDSRi register
TRDIOCi output
TRDIODi output
TRDIOBi output
The above applies to the following conditions:
The BFCi and BFDi bits in the TRDMR register are set to 0. (The TRDGRCi and TRDGRDi registers are not used as the buffer register.)
The EBi, ECi and EDi bits in the TRDOER1 register are set to 0. (Enable TRDIOBi, TRDIOCi and TRDIODi pin outputs.)
The TOBi and TOCi bits in the TRDOCR register are set to 0 (inactive level), the TODi bit is set to 1. (active level)
The POLB bit in the TRDPOCRi register is set to 1 (active level “H”), the POLC and POLD bits are set to 0. (active level “L”)
i = 0 or 1
IMFA bit in
IMFB bit in
IMFC bit in
IMFD bit in
Count source
Value in TRDi register
Operating Example of PWM Mode
1
0
1
0
1
0
1
0
m
n
p
q
Page 221 of 501
Initial output “H” to
compare match
Initial output “L” to
Initial output “L” to
compare match
compare match
Active level “H”
Active level “L”
Set to 0 by a program
Set to 0 by a program
q + 1
Inactive Level “H”
Inactive Level “L”
p + 1
n + 1
m + 1
m: Setting value in TRDGRAi register
n: Setting value in TRDGRBi register
p: Setting value in TRDGRCi register
q: Setting value in TRDGRDi register
m - q
Set to 0 by a program
m - p
m - n
Set to 0 by a program
14. Timers