R5F21236KFP#U0 Renesas Electronics America, R5F21236KFP#U0 Datasheet - Page 324

• Manufacturer Part Number: R5F21236KFP#U0
• Description: IC R8C/23 MCU FLASH 48LQFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/R8C/Tiny/23r

Specifications of R5F21236KFP#U0

• Core Processor: R8C
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: CAN, I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, Voltage Detect, WDT
• Number Of I /o: 41
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 48-LQFP
• For Use With: RCDK8C - KIT DEV EVAL FOR CAN R8C/23R0E521237CPE00 - EMULATOR COMPACT R8C/20/21/22/23
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/22 Group, R8C/23 Group
Rev.2.00 Aug 20, 2008
REJ09B0251-0200
16.2.1
16.2.1.1
A transfer clock can be selected from 7 internal clocks (f1/256, f1/128, f1/64, f1/32, f1/16, f1/8 and f1/4) and an
external clock.
When using the clock synchronous serial I/O with chip select, set the SCKS bit in the SSMR2 register to 1 and
select the SSCK pin as the serial clock pin.
When the MSS bit in the SSCRH register is set to 1 (operates as master device), an internal clock can be
selected and the SSCK pin functions as output. When transfer is started, the SSCK pin outputs clocks of the
transfer rate selected in the CKS0 to CKS2 bits in the SSCRH register.
When the MSS bit in the SSCRH register is set to 0 (operates as slave device), an external clock can be selected
and the SSCK pin functions as input.
Association between transfer clock polarity, phase and data changes according to a combination of the SSUMS
bit in the SSMR2 register and the CPHS and CPOS bits in the SSMR register.
Figure 16.10 shows the Association between Transfer Clock Polarity, Phase, and Transfer Data.
Also, the MSB-first transfer or LSB-first transfer can be selected by setting the MLS bit in the SSMR register.
When the MLS bit is set to 1, transfer is started from the LSB to MSB. When the MLS bit is set to 0, transfer is
started from the MSB to LSB.
Transfer Clock
Association between Transfer Clock Polarity, Phase, and Data
Page 302 of 501
16. Clock Synchronous Serial Interface