EZ80F92AZ020EG Zilog, EZ80F92AZ020EG Datasheet - Page 210

• Manufacturer Part Number: EZ80F92AZ020EG
• Description: IC ACCLAIM MCU 128KB 100LQFP
• Manufacturer: Zilog
• Series: eZ80® Acclaim!®r

Specifications of EZ80F92AZ020EG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, WDT
• Number Of I /o: 24
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 100-LQFP
• Processor Series: EZ80F92x
• Core: eZ80
• Data Bus Width: 8 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, IrDA, SPI, UART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 6
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: eZ80F920200ZCOG
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-3871; EZ80F92AZ020EG

PS015313-0508
Flash Interrupt Control Register
There are two sources of interrupts from the Flash controller. These two sources are:
1. Page Erase, Mass Erase, or Row Program completed successfully.
2. An error condition occurred.
Either or both of the two interrupt sources can be enabled by setting the appropriate bits in
the Flash Interrupt Control register.
The Flash Interrupt Control register contains four status bits to indicate the following error
conditions:
•
•
•
•
If the Error Condition Interrupt is enabled, any of the four error conditions result in an
interrupt request being sent to the eZ80F92 device’s Interrupt Controller. Reading the
Flash Interrupt Control register clears all error condition flags and the done flag.
Bit
Position
[0]
BLK0_PROT
Note: *Unused in the eZ80F93 device.
Row Program Time-out
current Row Program operation does not complete within 2,432 Flash controller
clocks (12.4–15.8 ms depending on the Flash controller clock period), the Flash con-
troller terminates the Row Program operation by clearing Bit 2 of the Flash Program
Control register and setting the RP_TMO error bit to 1.
Write Violation
memory (the Write is not performed).
Page Erase Violation
memory (the requested page is not erased).
Mass Erase Violation
more protected blocks in Flash memory (the Mass Erase is not performed).
Value Description
0
1
.
This bit indicates an attempt to write to a protected block of Flash
.
Disable Write/Erase Protect on block 0x00000 to 0x03FFF
Enable Write/Erase Protect on block 0x00000 to 0x03FFF
.
This bit indicates an attempt to erase a protected block of Flash
This bit indicates an attempt to Mass Erase when there are one
.
This bit signals a time-out during Row Programming. If the
Product Specification
eZ80F92/eZ80F93
Flash Memory
203