HD64F2239TF20I Renesas Electronics America, HD64F2239TF20I Datasheet - Page 283

• Manufacturer Part Number: HD64F2239TF20I
• Description: MCU 3V 384K I-TEMP 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of HD64F2239TF20I

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

(2) Full Address Mode
• DMABCRH
Bit
3
2
1
0
Bit
15
14
Bit Name
DTIE1B
DTIE1A
DTIE0B
DTIE0A
Bit Name
FAE1
FAE0
Initial Value
0
0
0
0
Initial Value
0
0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Description
Data Transfer End Interrupt Enable 1B
Data Transfer End Interrupt Enable 1A
Data Transfer End Interrupt Enable 0B
Data Transfer End Interrupt Enable 0A
These bits enable or disable an interrupt to the
CPU or DTC when transfer ends. If the DTIE bit
is set to 1 when DTE = 0, the DMAC regards
this as indicating the end of a transfer, and
issues a transfer end interrupt request to the
CPU or DTC.
A transfer end interrupt can be canceled either
by clearing the DTIE bit to 0 in the interrupt
handling routine, or by performing processing to
continue transfer by setting the transfer counter
and address register again, and then setting the
DTE bit to 1.
0: Transfer end interrupt is disabled
1: Transfer end interrupt is enabled
Description
Full Address Enable 1
Specifies whether channel 1 is to be used in
short address mode or full address mode.
In full address mode, channels 1A and 1B are
used together as channel 1.
0: Short address mode
1: Full address mode
Full Address Enable 0
Specifies whether channel 0 is to be used in
short address mode or full address mode.
In full address mode, channels 0A and 0B are
used together as channel 0.
0: Short address mode
1: Full address mode
Rev. 6.00 Mar. 18, 2010 Page 221 of 982
Section 8 DMA Controller (DMAC)
REJ09B0054-0600