HD64F2239TF20I Renesas Electronics America, HD64F2239TF20I Datasheet - Page 780

• Manufacturer Part Number: HD64F2239TF20I
• Description: MCU 3V 384K I-TEMP 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of HD64F2239TF20I

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 20 Flash Memory (F-ZTAT Version)
Rev. 6.00 Mar. 18, 2010 Page 718 of 982
REJ09B0054-0600
1. Initial state
3. Flash memory initialization
The old program version or data remains written
in the flash memory. The user should prepare the
programming control program and new
application program beforehand in the host.
This LSI
The erase program in the boot program area (in
RAM) is executed, and the flash memory is
initialized (to H'FF). In boot mode, total flash
memory erasure is performed, without regard to
blocks.
This LSI
Application program
preprogramming
Flash memory
Flash memory
Flash memory
Boot program
Boot program
(old version)
erase
Programming control
New application
New application
program
program
program
Host
Host
Boot program area
Programming control
Figure 20.3 Boot Mode (Example)
program
RAM
RAM
SCI
SCI
2. Programming control program transfer
4. Writing new application program
This LSI
This LSI
When boot mode is entered, the boot program in
this LSI (originally incorporated in the chip) is
started and the programming control program in
the host is transferred to RAM via SCI
communication. The boot program required for
flash memory erasing is automatically transferred
to the RAM boot program area.
The programming control program transferred
from the host to RAM is executed, and the new
application program in the host is written into the
flash memory.
Application program
New application
Flash memory
Flash memory
Boot program
Boot program
(old version)
program
New application
program
Host
Host
Boot program area
Boot program area
Programming control
Programming control
Program execution state
program
program
RAM
RAM
SCI
SCI