SW00ENB-ZCC Toshiba, SW00ENB-ZCC Datasheet - Page 24

• Manufacturer Part Number: SW00ENB-ZCC
• Description: MCU, MPU & DSP Development Tools CASEWORKS
• Manufacturer: Toshiba

Specifications of SW00ENB-ZCC

• Tool Type: Development Software Support
• Core Architecture: 870
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Tray
Tube
Tape
If the 12-month storage period has expired, or if the 30% humidity indicator shown in Figure 1
is pink when the packing is opened, it may be advisable, depending on the device and packing
type, to back the devices at high temperature to remove any moisture. Please refer to the table
below. After the pack has been opened, use the devices in a 5 C to 30 C. 60% RH environment
and within the effective usage period listed on the moisture-proof package. If the effective
usage period has expired, or if the packing has been stored in a high-humidity environment,
bake the devices at high temperature.
When baking devices, protect the devices from static electricity.
Moisture indicators can detect the approximate humidity level at a standard temperature of
25 C. 6-point indicators and 3-point indicators are currently in use, but eventually all
indicators will be 3-point indicators.
Packing
If the packing bears the “Heatproof” marking or indicates the maximum temperature which it can
withstand, bake at 125 C for 20 hours. (Some devices require a different procedure.)
Transfer devices to trays bearing the “Heatproof” marking or indicating the temperature which
they can withstand, or to aluminum tubes before baking at 125 C for 20 hours.
Deviced packed on tape cannot be baked and must be used within the effective usage period
after unpacking, as specified on the packing.
HUMIDITY INDICATOR
READ AT LAVENDER
BETWEEN PINK & BLUE
60%
50%
40%
30%
20%
10%
(a) 6-point indicator
3 General Safety Precautions and Usage Considerations
Figure 1 Humidity indicator
10
Moisture removal
HUMIDITY INDICATOR
READ AT LAVENDER
BETWEEN PINK & BLUE
(b) 3-point indicator
40
30
20