LPC47M192-NW Standard Microsystems (SMSC), LPC47M192-NW Datasheet - Page 128

• Manufacturer Part Number: LPC47M192-NW
• Manufacturer: Standard Microsystems (SMSC)

Specifications of LPC47M192-NW

• Lead Free Status / RoHS Status: Compliant

Game Port Register
Register Location:
Default Value:
Attribute:
Size:
The game port register is a read-only register. However, writing to the game port resets the RC time constant pins
(TIMA,B) to zero. The reset of the time constant pins occur on the “back” edge of the write signal (when the write
signal goes from its active state to its inactive state).
The game port read (JOYR) will be an IO read to the address programmed into the base IO address in Logical
Device 9.
The game port write (JOYW) will be an IO write to the address programmed into the base IO address in Logical
Device 9.
Minimum Rise Time
The fastest rise time on the RC constant pins (minimum RC time constant) for the game port is 20usec.
7.17.1 POWER CONTROL REGISTER
Bit 2 in the Power Control Register (CR22) is the power control bit for the game port. This bit has the same function
as the activate bit for logical device 9 and shadows the activate bit. The activate bit also shadows the power control
bit 2.
7.17.2 VREF PIN
The LPC47M192 has a reference voltage pin input on pin 44 of the part. This reference voltage can be connected to
either a 5V supply or a 3.3V supply. It is used for the game port.
The reference voltage is used in the game port logic so that the joystick trigger voltage is 2/3 VREF where VREF is
either 5V or 3.3V. This is to preserve joystick compatibility by maintaining the RC time constant reset trigger voltage
of 3.3V (nominal) with VREF=5V (nominal), if required.
SMSC DS – LPC47M192
Joystick 2
Button #2
(J2B2)
D7
Joystick 2
Button #1
(J2B1)
D6
<GAME_PORT>+0h
00h
Read-Only
8-bits
Button #2
Joystick 1
(J1B2)
D5
DATASHEET
Joystick 1
Button #1
(J1B1)
D4
Page 128
Joystick 2
(OUT2B)
Y-Axis
D3
System
on
Joystick 2
(OUT2A)
X-Axis
D2
I/O Space
VTR POR
Joystick 1
(OUT1B)
Y-Axis
D1
Joystick 1
(OUT1A)
X-Axis
D0
Rev. 03/30/05