LPC47M192-NW Standard Microsystems (SMSC), LPC47M192-NW Datasheet - Page 190

• Manufacturer Part Number: LPC47M192-NW
• Manufacturer: Standard Microsystems (SMSC)

Specifications of LPC47M192-NW

• Lead Free Status / RoHS Status: Compliant

11 OPERATIONAL DESCRIPTION
11.1 Maximum Guaranteed Ratings
Operating Temperature Range ................................................................................................................... 0
Storage Temperature Range ................................................................................................................... -55
Lead Temperature Range ......................................................................................... Refer to JEDEC Spec. J-STD-020
Note : Stresses above those listed above and below could cause permanent damage to the device. This is a stress
rating only and functional operation of the device at any other condition above those indicated in the operation sections
of this specification is not implied. When powering this device from laboratory or system power supplies, it is important
that the Absolute Maximum Ratings not be exceeded or device failure can result. Some power supplies exhibit voltage
spikes on their outputs when the AC power is switched on or off. In addition, voltage transients on the AC power line
may appear on the DC output. If this possibility exists, it is suggested that a clamp circuit be used.
11.1.1 SUPER I/O SECTION (PINS 1 TO 100)
Maximum V
Positive Voltage on any pin, with respect to Ground ..........................................................................................V
Negative Voltage on any pin, with respect to Ground ............................................................................................. -0.3V
11.1.2 HARDWARE MONITORING BLOCK (PINS 101 TO 128)
11.2 Hardware Monitoring Block Specifications
11.2.1 KEY SPECIFICATIONS
11.2.2 SUPPLY CURRENT
11.2.3 OPERATING TEMPERATURE
11.2.4 OPERATING VOLTAGE RATINGS
SMSC DS – LPC47M192
Positive Supply Voltage (V+)
Voltage on Any Input or Output Pin
Voltage on the Voltage Channels
Supply Voltage
Voltage monitoring accuracy
Temperature Accuracy
ADC Resolution
Monitoring Mode
Sleep Mode
Shutdown Mode
Operating Temperature Range
Supply Voltage (V+)
VIN Voltage Range (Digital pins)
cc
.......................................................................................................................................................... +5.5V
DATASHEET
HVcc-10%
HVcc+10%
±2% (max)
See DC Characteristics
8 Bits
1.2 mA (typical)
200 µA (typical)
1 µA (typical)
Page 190
+5.5 V (max)
-0.3V to (HVcc+0.3V) (Except analog inputs)
-0.3V to (Channel Voltage + 10%)
0 °C <= T
3.3 Volt Supply
+3 V to +3.6 V
-0.05 V to 3.6V
<HVcc
A
<= +70 °C
<
2 mA (max)
500 µA (max)
3 µA (max)
o
o
C to +70
Rev. 03/30/05
to +150
cc
+0.3V
o
o
C
C