SAM9RL64 Atmel Corporation, SAM9RL64 Datasheet - Page 116

• Manufacturer Part Number: SAM9RL64
• Manufacturer: Atmel Corporation

Specifications of SAM9RL64

• Flash (kbytes): 0 Kbytes
• Pin Count: 217
• Max. Operating Frequency: 240 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 118
• Ext Interrupts: 118
• Usb Transceiver: 1
• Usb Speed: Hi-Speed
• Usb Interface: Device
• Spi: 1
• Twi (i2c): 2
• Uart: 5
• Ssc: 2
• Sd / Emmc: 1
• Graphic Lcd: Yes
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 6
• Adc Resolution (bits): 10
• Adc Speed (ksps): 220
• Resistive Touch Screen: Yes
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 64
• Self Program Memory: NO
• External Bus Interface: 1
• Dram Memory: sdram
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 1.08 to 1.32
• Fpu: No
• Mpu / Mmu: No / Yes
• Timers: 3
• Output Compare Channels: 3
• Input Capture Channels: 3
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

Coprocessor Interface
4.5
4.5.1
4-12
Connecting coprocessors
Connecting a single coprocessor
A coprocessor in an ARM7TDMI processor system must have 32-bit connections to:
•
•
•
The coprocessor can optionally have connections to:
•
•
This section describes:
•
•
An example of how to connect:
•
•
the instruction stream from memory
data written by the core, MCR
data read by the core, MRC.
data written from memory, LDC
data read to memory, STC.
Connecting a single coprocessor on page 4-12
Connecting multiple coprocessors on page 4-13.
a coprocessor into an ARM7TDMI processor system if you are using a
bidirectional bus is shown in Figure 4-5
a coprocessor into an ARM7TDMI processor system if you are using a
unidirectional bus is shown in Figure 4-6 on page 4-13.
Copyright © 1994-2001. All rights reserved.
Figure 4-5 Coprocessor connections with bidirectional bus
ARM core
Coprocessor
D[31:0]
ARM DDI 0029G
CPDRIVE
Memory
system