ST10F276Z5T3 STMicroelectronics, ST10F276Z5T3 Datasheet - Page 103

• Manufacturer Part Number: ST10F276Z5T3
• Description: MCU 16BIT 832KBIT FLASH 144-TQFP
• Manufacturer: STMicroelectronics
• Series: ST10r

Specifications of ST10F276Z5T3

• Core Processor: ST10
• Core Size: 16-Bit
• Speed: 40MHz
• Connectivity: ASC, CAN, EBI/EMI, I²C, SSC, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 111
• Program Memory Size: 832KB (832K x 8)
• Program Memory Type: FLASH
• Ram Size: 68K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 24x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 144-TQFP, 144-VQFP
• Cpu Family: ST10
• Device Core Size: 16b
• Frequency (max): 40MHz
• Interface Type: CAN/I2C
• Total Internal Ram Size: 68KB
• # I/os (max): 111
• Number Of Timers - General Purpose: 5
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 4.5V
• On-chip Adc: 24-chx10-bit
• Instruction Set Architecture: CISC/RISC
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Mounting: Surface Mount
• Pin Count: 144
• Package Type: LQFP
• Processor Series: ST10F27x
• Core: ST10
• Data Bus Width: 16 bit
• Data Ram Size: 68 KB
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 111
• Number Of Timers: 5
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• For Use With: 497-6399 - KIT DEV STARTER ST10F276Z5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Compliant

ST10F276Z5
Multiple CAN bus
The ST10F276Z5 provides two CAN interfaces to support such kind of bus configuration as
shown in
Figure 22. Connection to two different CAN buses (e.g. for gateway application)
Parallel mode
In addition to previous configurations, a parallel mode is supported. This is shown in
Figure
Figure 23. Connection to one CAN bus with internal Parallel mode enabled
1. P4.4 and P4.7 when not used as CAN functions can be used as general purpose I/O while they cannot be
used as external bus address lines.
23.
Figure
CAN_H
CAN_L
22.
CAN_H
CAN_L
P4.5
CAN bus 1
Transceiver
RX
CAN1
CAN
P4.5
RX
Transceiver
TX
CAN1
P4.6
CAN
TX
P4.4
P4.6
Transceiver
RX
CAN bus 2
CAN2
CAN
P4.4
RX
TX
CAN2
P4.7
CAN bus
TX
CAN_H
CAN_L
P4.7
XMISC.CANPAR = 0
XMISC.CANPAR = 1
(Both CAN enabled)
CAN modules
103/239