ST10F276Z5T3 STMicroelectronics, ST10F276Z5T3 Datasheet - Page 168

• Manufacturer Part Number: ST10F276Z5T3
• Description: MCU 16BIT 832KBIT FLASH 144-TQFP
• Manufacturer: STMicroelectronics
• Series: ST10r

Specifications of ST10F276Z5T3

• Core Processor: ST10
• Core Size: 16-Bit
• Speed: 40MHz
• Connectivity: ASC, CAN, EBI/EMI, I²C, SSC, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 111
• Program Memory Size: 832KB (832K x 8)
• Program Memory Type: FLASH
• Ram Size: 68K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 24x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 144-TQFP, 144-VQFP
• Cpu Family: ST10
• Device Core Size: 16b
• Frequency (max): 40MHz
• Interface Type: CAN/I2C
• Total Internal Ram Size: 68KB
• # I/os (max): 111
• Number Of Timers - General Purpose: 5
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 4.5V
• On-chip Adc: 24-chx10-bit
• Instruction Set Architecture: CISC/RISC
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Mounting: Surface Mount
• Pin Count: 144
• Package Type: LQFP
• Processor Series: ST10F27x
• Core: ST10
• Data Bus Width: 16 bit
• Data Ram Size: 68 KB
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 111
• Number Of Timers: 5
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• For Use With: 497-6399 - KIT DEV STARTER ST10F276Z5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Compliant

Register set
Note:
168/239
Table 76.
IDPROG (F078h / 3Ch)
Table 77.
All identification words are read-only registers.
The values written inside different Identification Register bits are valid only after the Flash
initialization phase is completed. When code execution is started from internal memory (pin
EA held high during reset), the Flash has completed its initialization, so the bits of
Identification Registers are immediately ready to be read out. On the contrary, when code
execution is started from external memory (pin EA held low during reset), the Flash
initialization is not yet completed, so the bits of Identification Registers are not ready. The
user can poll bits 15 and 14 of IDMEM register: When both bits are read low, the Flash
initialization is complete, so all Identification Register bits are correct.
Before Flash initialization completion, the default setting of the different identification
registers are the following:
Table 78.
MEMSIZE
MEMTYP
PROGVDD
PROGVPP
IDMANUF
IDCHIP
IDMEM
IDPROG
15
Bit
Bit
Register name
14
IDMEM description
IDPROG description
Identification register settings
13
Internal memory size
Internal Memory size is 4 x (MEMSIZE) (in Kbyte)
0D0h for ST10F276Z5 (832 Kbytes)
Internal memory type
‘0h’: ROM-Less
‘1h’: (M) ROM memory
‘2h’: (S) Standard FLASH memory
‘3h’: (H) High Performance FLASH memory (ST10F276Z5)
‘4h...Fh’: reserved
Programming VDD voltage
VDD voltage when programming EPROM or FLASH devices is calculated using
the following formula: VDD = 20 x [PROGVDD] / 256 (volts) - 40h for ST10F276Z5
(5 V).
Programming VPP voltage (no need of external VPP) - 00h
PROGVPP
12
R
11
0403h
114xh (x = silicon revision)
F0D0h
0040h
10
9
ESFR
8
7
Function
Function
6
Value
5
PROGVDD
4
R
3
Reset value:0040h
2
ST10F276Z5
1
0