HD64F7051SFJ20V Renesas Electronics America, HD64F7051SFJ20V Datasheet - Page 380

• Manufacturer Part Number: HD64F7051SFJ20V
• Description: MCU 5V 256K J-TEMP PB-FREE QFP-1
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7050r

Specifications of HD64F7051SFJ20V

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: EBI/EMI, SCI
• Peripherals: DMA, WDT
• Number Of I /o: 102
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 168-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Section 12 Watchdog Timer (WDT)
12.2.2
The timer control/status register (TCSR) is an 8-bit read/write register. (The TCSR differs from
other registers in that it is more difficult to write to. See section 12.2.4, Register Access, for
details.) TCSR performs selection of the timer counter (TCNT) input clock and mode.
Bits 7 to 5 are initialized to 000 by a power-on reset, in hardware standby mode and software
standby mode. Bits 2 to 0 are initialized to 000 by a power-on reset and in hardware standby
mode, but retain their values in the software standby mode.
Note:
Bit 7—Overflow Flag (OVF): Indicates that the TCNT has overflowed from H'FF to H'00 in the
interval timer mode. It is not set in the watchdog timer mode.
Bit 7: OVF
0
1
Bit 6—Timer Mode Select (WT/IT IT IT IT): Selects whether to use the WDT as a watchdog timer or
interval timer. When the TCNT overflows, the WDT either generates an interval timer interrupt
(ITI) or generates a WDTOVF signal, depending on the mode selected.
Bit 6: WT/IT IT IT IT
0
1
Rev. 5.00 Jan 06, 2006 page 358 of 818
REJ09B0273-0500
Initial value:
* Only 0 can be written in bit 7 to clear the flag.
Timer Control/Status Register (TCSR)
R/W:
Bit:
R/(W) *
OVF
7
0
Description
No overflow of TCNT in interval timer mode (initial value)
Cleared by reading OVF, then writing 0 in OVF
TCNT overflow in the interval timer mode
Description
Interval timer mode: interval timer interrupt request to the CPU when
TCNT overflows (initial value)
Watchdog timer mode: WDTOVF signal output externally when TCNT
overflows. (Section 12.2.3, Reset Control/Status Register (RSTCSR),
describes in detail what happens when TCNT overflows in the watchdog
timer mode.)
WT/IT
R/W
6
0
TME
R/W
5
0
—
R
4
1
—
R
3
1
CKS2
R/W
2
0
CKS1
R/W
1
0
CKS0
R/W
0
0