Z16F2800100ZCOG Zilog, Z16F2800100ZCOG Datasheet - Page 260

• Manufacturer Part Number: Z16F2800100ZCOG
• Description: DEV KIT FOR Z16F ZNEO
• Manufacturer: Zilog
• Series: ZNEO™r
• Type: MCUr

Specifications of Z16F2800100ZCOG

• Contents: Evaluation Board, Software and Documentation
• For Use With/related Products: Z16F Series
• For Use With: 269-4661 - KIT ACC ETHERNET SMART CABLE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 269-4537

ADC Overview
Architecture
Operation
PS022008-0810
ADC Output = 1024*(ANAx/VREF)
The ZNEO Z16F Series devices include a 12-channel ADC. The ADC converts an analog
input signal to a 10-bit binary number. The features of the successive approximation ADC
include:
•
•
•
•
•
•
•
•
The architecture as illustrated in
plexer, sample-and-hold amplifier, and 10-bit successive approximation ADC. The ADC
digitizes the signal on selected channel and stores the digitized data in the ADC data regis-
ters. In environment with high electrical noise, an external RC filter must be added at the
input pins to reduce high frequency noise.
The ADC converts the analog input, ANAx, to a 10-bit digital representation. 
The equation for calculating the digital value is represented by:
Assuming zero gain and offset errors, any voltage outside the ADC input limits of AVSS
and VREF returns all 0s or 1s, respectively.
A new conversion is initiated by either software write to the ADC Control register’s
START bit or by PWM trigger. For detailed information on the PWM trigger,
see
any conversion currently in progress and begins a new conversion. To avoid disrupting a
conversion already in progress, the START bit is read to indicate ADC operation status
(busy or available).
12 analog input sources multiplexed with GPIO ports.
Fast conversion time (2.5 s).
Programmable timing controls.
Interrupt on conversion complete.
Internal voltage reference generator.
Internal reference voltage available externally.
Ability to supply external reference voltage.
Ability to do simultaneous or independent conversions.
Synchronization of PWM and ADC
P R E L I M I N A R Y
Figure 51
on page 120. Initiating a new conversion stops
on page 243 consists of an 12-input multi-
Product Specification
ZNEO
Analog Functions
Z16F Series
244