EFM32TG210F32 Energy Micro, EFM32TG210F32 Datasheet - Page 106

• Manufacturer Part Number: EFM32TG210F32
• Description: MCU 32BIT 32KB FLASH 32-QFN
• Manufacturer: Energy Micro
• Series: Tiny Geckor

Specifications of EFM32TG210F32

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 32MHz
• Connectivity: EBI/EMI, I²C, IrDA, SmartCard, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 24
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.8 V
• Data Converters: A/D 4x12b, D/A 1x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-VQFN Exposed Pad
• Processor Series: EFM32
• Core: ARM Cortex-M3
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: UART, I2C, SPI
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 17
• Number Of Timers: 1
• Operating Supply Voltage: 1.8 V to 3.8 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Processor To Be Evaluated: EFM32TG210
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

17
16:14
13
12:11
10:9
8
7
6:5
4
3:2
1:0
Bit
2010-12-21 - d0034_Rev0.90
LFXOBUFCUR
This value has been set during calibration and should not be changed.
Reserved
LFXOBOOST
Adjusts start-up boost current for LFXO.
LFXOMODE
Set this to configure the external source for the LFXO. The oscillator setting takes effect when 1 is written to LFXOEN in
CMU_OSCENCMD. The oscillator setting is reset to default when 1 is written to LFXODIS in CMU_OSCENCMD.
HFXOTIMEOUT
Configures the start-up delay for HFXO.
Reserved
HFXOGLITCHDETEN
This bit enables the glitch detector which is active as long as the start-up ripple-counter is counting. A detected glitch will reset the
ripple-counter effectively increasing the start-up time. Once the ripple-counter has timed-out, glitches will not be detected.
HFXOBUFCUR
This value has been set during calibration and should not be changed.
Reserved
HFXOBOOST
Used to adjust start-up boost current for HFXO.
HFXOMODE
Set this to configure the external source for the HFXO. The oscillator setting takes effect when 1 is written to HFXOEN in
CMU_OSCENCMD. The oscillator setting is reset to default when 1 is written to HFXODIS in CMU_OSCENCMD.
Name
Value
2
3
Value
0
1
Value
0
1
2
Value
0
1
2
3
Value
0
1
2
3
Value
0
1
2
Mode
16KCYCLES
32KCYCLES
Mode
70PCENT
100PCENT
Mode
XTAL
BUFEXTCLK
DIGEXTCLK
Mode
8CYCLES
256CYCLES
1KCYCLES
16KCYCLES
Mode
50PCENT
70PCENT
80PCENT
100PCENT
Mode
XTAL
BUFEXTCLK
DIGEXTCLK
0
1
0x0
0x3
0
0x1
0x3
0x0
Reset
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
RW
RW
RW
RW
RW
RW
RW
RW
Access
Description
Timeout period of 16384 cycles
Timeout period of 32768 cycles
Description
70 %
100 % (default)
Description
32.768 kHz crystal oscillator
An AC coupled buffer is coupled in series with LFXTAL_N pin, suitable for external
sinus wave (32.768 kHz).
Digital external clock on LFXTAL_N pin. Oscillator is effectively bypassed.
Description
Timeout period of 8 cycles
Timeout period of 256 cycles
Timeout period of 1024 cycles
Timeout period of 16384 cycles
Description
50 %
70 %
80 %
100 % (default)
Description
4-32 MHz crystal oscillator
An AC coupled buffer is coupled in series with HFXTAL_N, suitable for external sine
wave (4-32 MHz)
Digital external clock on HFXTAL_N pin. Oscillator is effectively bypassed.
...the world's most energy friendly microcontrollers
106
LFXO Boost Buffer Current
LFXO Start-up Boost Current
LFXO Mode
HFXO Timeout
HFXO Glitch Detector Enable
HFXO Boost Buffer Current
HFXO Start-up Boost Current
HFXO Mode
Description
www.energymicro.com