mpc823rg Freescale Semiconductor, Inc, mpc823rg Datasheet - Page 881

• Manufacturer Part Number: mpc823rg
• Description: Mpc823 Powerquicc Integrated Communications Processor For Portable Systems
• Manufacturer: Freescale Semiconductor, Inc

TEN—SMCx Transmit Enable
REN—SMCx Receive Enable
16.11.8.5 SMCx GCI EVENT REGISTER. When a serial management controller is in GCI
mode, the 8-bit memory-mapped SMCx event register is referred to as the SMCx GCI event
(SMCE–GCI) register. It is used to generate interrupts and report events recognized by the
SMCx channel. When an event is recognized, a serial management controller sets the
corresponding bit in this register. Interrupts generated by this register can be masked in the
SMCM–GCI register. A bit is cleared by writing a 1 (writing a zero has no effect) more than
one bit can be cleared at a time. All unmasked bits must be cleared before the
communication processor module clears the internal interrupt request to the CPM interrupt
controller. This register is cleared by reset and can be read at any time.
Bits 0–3—Reserved
These bits are reserved and must be set to 0.
CTXB—Circuit Interface Channel Buffer Transmitted
This bit indicates that the circuit interface transmit buffer is now empty.
CRXB—Circuit Interface Channel Buffer Received
This bit indicates when the circuit interface receive buffer is full.
MTXB—Monitor Channel Buffer Transmitted
This bit indicates that the monitor transmit buffer is now empty.
MRXB—Monitor Channel Buffer Received
This bit indicates when the monitor receive buffer is full.
SMCE–GCI
RESET
FIELD
ADDR
R/W
BIT
0 = SMCx transmitter disabled.
1 = SMCx transmitter enabled.
0 = SMCx receiver disabled.
1 = SMCx receiver enabled.
0
Freescale Semiconductor, Inc.
1
RESERVED
For More Information On This Product,
R/W
0
(IMMR & 0xFFFF0000) + 0xA86 (SMC1), 0xA96 (SMC2)
MPC823 REFERENCE MANUAL
2
Go to: www.freescale.com
3
CTXB
R/W
4
0
Communication Processor Module
CRXB
R/W
5
0
MTXB
R/W
6
0
MRXB
R/W
16-429
7
0