mpc823rg Freescale Semiconductor, Inc, mpc823rg Datasheet - Page 896

• Manufacturer Part Number: mpc823rg
• Description: Mpc823 Powerquicc Integrated Communications Processor For Portable Systems
• Manufacturer: Freescale Semiconductor, Inc

Communication Processor Module
16.12.4.1.2 SPI Receive Buffer Descriptor. Using receive (RX) buffer descriptors, the
communication processor module reports information about each buffer of received data,
closes the current buffer, generates a maskable interrupt, and starts receiving data in the
next buffer once the current buffer is full. Additionally, it closes the buffer when the serial
peripheral interface is configured as a slave and the SPISEL pin goes inactive, thus
indicating that the reception process has stopped.
The first word of the RX buffer descriptor contains status and control bits that you prepare
before reception and then the communication processor module sets them after the buffer
is closed. The second word contains the data length (in bytes) that is received and the third
and fourth words contain a pointer that always points to the beginning of the received data
buffer. You must configure the RX buffer descriptor bits before the serial peripheral interface
is enabled.
E—Empty
Bit 1, 5, and 7–13—Reserved
These bits are reserved and must be set to 0.
OFFSET + 0
OFFSET + 2
OFFSET + 4
OFFSET + 6
NOTE: You are only responsible for initializing the items in bold.
0 = The data buffer associated with this RX buffer descriptor is filled with data or stops
1 = The data buffer associated with this buffer descriptor is empty or is currently
receiving data because an error occurred. The core is free to examine or write to
any fields of this RX buffer descriptor, but the communication processor module
does not use this buffer descriptor as long as the E bit is zero.
receiving data. This RX buffer descriptor and its associated receive buffer are
owned by the communication processor module. Once the E bit is set, the core
must not write any fields of this RX buffer descriptor.
0
E
Note: The communication processor module sets all the status bits in this buffer
RES
1
W
descriptor, but you must clear them before submitting the buffer descriptor to the
communication processor module.
2
Freescale Semiconductor, Inc.
For More Information On This Product,
3
I
MPC823 REFERENCE MANUAL
4
L
Go to: www.freescale.com
RES
5
RX DATA BUFFER POINTER
CM
6
DATA LENGTH
7
8
9
RESERVED
10
11
12
13
MOTOROLA
OV
14
ME
15