h8s-2628 Renesas Electronics Corporation., h8s-2628 Datasheet - Page 522

• Manufacturer Part Number: h8s-2628
• Description: Renesas 16-bit Single-chip Microcomputer H8s Family/h8s/2600 Series
• Manufacturer: Renesas Electronics Corporation.

Section 19 ROM
19.7
A setting in the RAM emulation register (RAMER) enables part of RAM to be overlapped onto
the flash memory area so that data to be written to flash memory can be emulated in RAM in real
time. Emulation can be performed in user mode or user program mode. Figure 19.7 shows an
example of emulation of real-time flash memory programming.
1. Set RAMER to overlap part of RAM onto the area for which real-time programming is
2. Emulation is performed using the overlapping RAM.
3. After the program data has been confirmed, the RAMS bit is cleared, thus releasing the RAM
4. The data written in the overlapping RAM is written into the flash memory space (EB0).
Rev. 3.00 Oct 04, 2005 page 482 of 598
REJ09B0155-0300
required.
overlap.
Flash Memory Emulation in RAM
Figure 19.7 Flowchart for Flash Memory Emulation in RAM
No
Execute application program
Write tuning data to overlap
Start of emulation program
End of emulation program
Write to flash memory
emulation block
Clear RAMER
Set RAMER
Tuning OK?
RAM
Yes