MC68HC908JK8CP Freescale Semiconductor, MC68HC908JK8CP Datasheet - Page 99

• Manufacturer Part Number: MC68HC908JK8CP
• Manufacturer: Freescale Semiconductor

Specifications of MC68HC908JK8CP

• Cpu Family: HC08
• Device Core Size: 8b
• Frequency (max): 8MHz
• Interface Type: SCI
• Program Memory Type: Flash
• Program Memory Size: 8KB
• Total Internal Ram Size: 256Byte
• # I/os (max): 15
• Number Of Timers - General Purpose: 4
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 2.7V
• On-chip Adc: 13-chx8-bit
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Through Hole
• Pin Count: 20
• Package Type: PDIP
• Lead Free Status / Rohs Status: Not Compliant

7.5.4 MON_PRGRNGE
In monitor mode, MON_PRGRNGE is used to program a range of FLASH locations with data loaded into
the data array.
The MON_PRGRNGE routine is designed to be used in monitor mode. It performs the same function as
the PRGRNGE routine (see
via an SWI instruction. After a MON_PRGRNGE call, the SWI instruction will return the control back to
the monitor code.
7.5.5 MON_ERARNGE
In monitor mode, ERARNGE is used to erase a range of locations in FLASH.
The MON_ERARNGE routine is designed to be used in monitor mode. It performs the same function as
the ERARNGE routine (see
via an SWI instruction. After a MON_ERARNGE call, the SWI instruction will return the control back to the
monitor code.
Freescale Semiconductor
Routine Name
Routine Description
Calling Address
Stack Used
Data Block Format
Routine Name
Routine Description
Calling Address
Stack Used
Data Block Format
MC68HC908JL8/JK8 • MC68HC08JL8/JK8 • MC68HC908KL8 Data Sheet, Rev. 3.1
7.5.1
7.5.2
Table 7-14. MON_PRGRNGE Routine
Table 7-15. MON_ERARNGE Routine
PRGRNGE), except that MON_PRGRNGE returns to the main program
ERARNGE), except that MON_ERARNGE returns to the main program
MON_PRGRNGE
Program a range of locations, in monitor mode
$FC28
17 bytes
Bus speed
Data size
Starting address (high byte)
Starting address (low byte)
Data 1
Data N
MON_ERARNGE
Erase a page or the entire array, in monitor mode
$FF2C
11 bytes
Bus speed
Data size
Starting address (high byte)
Starting address (low byte)
:
ROM-Resident Routines
99