XC908AS60ACFU Motorola Semiconductor Products, XC908AS60ACFU Datasheet - Page 328

• Manufacturer Part Number: XC908AS60ACFU
• Description: MC68HC908AZ60A, MC68HC908AS60A Hcmos Microcontroller Unit Technical Data
• Manufacturer: Motorola Semiconductor Products

Timer Interface Module B (TIMB)
20.5 Interrupts
Technical Data
328
compare can also cause incorrect PWM signal generation when
changing the PWM pulse width to a new, much larger value.
Setting MS0B links channels 0 and 1 and configures them for buffered
PWM operation. The TIMB channel 0 registers (TBCH0H–TBCH0L)
initially control the buffered PWM output. TIMB status control register 0
(TBSC0) controls and monitors the PWM signal from the linked
channels. MS0B takes priority over MS0A.
Clearing the toggle-on-overflow bit, TOVx, inhibits output toggles on
TIMB overflows. Subsequent output compares try to force the output to
a state it is already in and have no effect. The result is a 0% duty cycle
output.
Setting the channel x maximum duty cycle bit (CHxMAX) and setting the
TOVx bit generates a 100% duty cycle output (see
Status and Control Registers
The following TIMB sources can generate interrupt requests:
5. In the TIMB status control register (TBSC) clear the TIMB stop bit,
•
•
TSTOP.
TIMB overflow flag (TOF) — The TOF bit is set when the TIMB
counter value reaches the modulo value programmed in the TIMB
counter modulo registers. The TIMB overflow interrupt enable bit,
TOIE, enables TIMB overflow CPU interrupt requests. TOF and
TOIE are in the TIMB status and control register.
TIMB channel flags (CH1F–CH0F) — The CHxF bit is set when an
input capture or output compare occurs on channel x. Channel x
TIMB CPU interrupt requests are controlled by the channel x
interrupt enable bit, CHxIE.
Timer Interface Module B (TIMB)
on page 336).
MC68HC908AZ60A — Rev 2.0
TIMB Channel
MOTOROLA